Stock List

30,000kg CR Conventional Welding Rotators, WestWorld
British made 30,000kg Welding Pipe Rotators with powered and idler unit, heavy duty conventional rollers to tolerate harsh and hard-wearing environments

3000kg Head and Tailstock Positioner, New West
Head and tailstock welding positioner with a carrying capacity of 3000kg ideal for holding and positioning large or awkward workpieces while welding

3000kg Welding Positioner, New West
New West 3000kg Welding Positioner that tilts and turns.

60,000kg Welding Rotators powered and idler unit, WestWorld
Heavy duty new Welding Pipe rotators. Model CR 60 with a 60,000kg turning capacity

Welding Head and Tail stock 10,000kg Positioner, New West
With a turning and positioning capacity of 10,000kg this New West Head and tail stock welding positioning system works by supporting one end of the work-piece and imparts rotational motion to the work

10 ton welding positioner For Hire Only
This welding positioner with a maxium load of 10,0000 with or without slip rings is available to rent

10 ton Welding Positioner with variable speed, New West
Maximum load capacity is 10,000kg for this new 2 axis Welding Positioner

10,000KG Conventional Welding Rotators, 110v, WestWorld
Conventional Rotators with a carrying capacity of 10 Tonne. Main supply 110 volts

10,000kg Conventional Welding Rotators, New West
New West model CR conventional 10,000kg welding rotators 1 powered 1 idler in a set

10,000kg Welding Positioner Fixed or Adjustable Height, WestWorld
10,000kg fixed or adjustable height welding positioner provides 360° rotation and 135° tilt to allow for weldments to be positioned for better automatic or down-hand welding.

10,000kg Welding Rotators powered and idler unit, WestWorld
Heavy duty 10,000kg welding rotators for cylindrical vessels, pipes and manufactured to tolerate the hardest, hard wearing environments

100,000kg Conventional Welding Rotators, New West
New West CR 100,000kg Conventional Welding Rotators - capacity of turning 100 ton using a set of 1 powered drive unit and 1 idler unit

1000kg Welding Positioner, New West
New Welding Positioner with maximum loading capacity of 1000 kg

20 and 30 ton Welding Rotators without base, New West
New West conventional welding pipe rotators without base. Model 20 - 20,000kg and Model 30 - 30,000kg capacity

20 Ton Self-Aligning Tank Rotators, New West
New Tank and Pipe welding rotators with a capacity of 20,000kg. One set comprising of 1 powered drive and 1 idler unit

20,000kg Conventional Welding Rotators, New West
New West Conventional Welding Pipe rotators. Model CR 20,000kg, 1 set consisting of 1 drive/powered unit and 1 idler unit

20,000kg Welding Rotators powered and idler unit, WestWorld
New heavy duty 20 ton conventional welding pipe rotators with 5 function pendant control

20/30 ton welding pipe Idler to suit power rotators, New West
These new Idlers for pipe rotators have a carrying capacity 20 ton can be added to set of welding rotators to increase capacity

2000kg Welding Positioner, New West
New welding rotators with a maximum loading capacity of 2000 kg

250kg Head Stock Welding Positioner AS IS 300
This is just a Head Stock positioner with a 350mm diameter table with hole thru at 40mm

3 Axis Hydraulic 2000kg Welding Positioner, New West
This 3 axis welding positioner can elevate, tilt, rotate and lift.

3 Axis Hydraulic 3000kg Welding Positioner, New West
The 3 axis welding positioner can do it all. Elevate, tilt, rotate and lift with hydraulic elevating (pressure >20 MPa) make the working height a perfect position

30,000kg Conventional Welding Rotators, New West
New West model CR30, 30,000kg welding rotators. Supplied in a set consisting of 1 powered drive unit and 1 idler unit

3000kg Welding Positioner, Tilting with Fixed Height, Westworld
New Conventional Welding Positioner 3000kg capacity. British designed and made

300kg Positioner 170mm Centre Through Hole, New West
300kg hollow shaft welding positioner similar to the VBC models.

40,000kg Space Saving Welding Rotators, New West
New West 40,000kg Welding Pipe Rotators 1 set of drive unit and idler unit designed to save space

5000kg Conventional Welding Rotators, New West
New West CR 5000kg welding rotators, a set consisting of 1 powered drive unit and 1 idler unit

5000kg Head and Tailstock Welding Positioner, New West
Head and tailstock Welding Positioner with a 5000kg capacity, ideal for positioning and turning large or awkward workpieces while welding

5000kg Welding Positioner Fixed Height with Tilting, Westworld
New conventional Welding Positioner 5 ton British design British Quality Assured

A&N Plant RP1T-S 1000kg Welding Positioner Adjustable height
A&N Plant RP1T-S 1000kg Welding Positioner with adjustable height

ABB Robot Remote Control
ABB remote control last used on welding robot

Acoustic Cleaner - process technology for marine and chemical plants
Pneumatically operated horns that produce low frequency, high energy sound waves

Acron MP 5.0 Mini Spot Welder
Mini spot welder and micro welder made by Poron Acron, model MP5-0NP

AEC Digit for Pre Heat and Stress-Relieving Heat Treatments PWHT
Low Tension Resistance Machines have been especially designed for pre-heating and stress-relieving heat treatments

ALX Arc Logger Ten
cable missing to screen

AMI & Polysoude Collets & Inserts Model 9, 8 and MW heads
Please state size required when enquiring, used and new available

AMI 107A Orbital Power Source with 9-2500 and collets
Starting from only £2000 the AMI M107A suits the AMI standard head range from 3mm to 190mm

AMI 205 Tube Welding Power Supply with remote water cooled
The Arc Machine, Inc orbital welding system, model 205 WDR is the most advanced, easy to use orbital (GTAW) power supply in the industry - capable of welding thin-wall tubes, pipes and fittings.

AMI 207 Orbital Tube and Pipe Fusion TIG welder from £8000 GBP
M207 is an orbital welder, microprocessor controlled, fusion GTAW power supply capable of welding tubing and thin wall pipe.

AMI 215 Micro Processor Orbital Welding Power Source for Tube Welding
Microprocessor controlled orbital welding power supply can be supplied with open heads if required M95. M79 , M81 and M15 Dual head and others

AMI 227 Orbital Tube and Pipe Welding Systems water cooled
The 227 is a reliable and versatile portable pipe welding power supply.

AMI 227 Power Source with 95 -6625 If required
The 227 is a reliable and versatile portable pipe welding power supply.

AMI 307 Orbital Tube Power Source for Fusion Butt Welding
The Model 307 is the most advanced orbital tube welding power supply of its type in the world

AMI 415 Orbital Welding Supply with M15 Orbital weld head
AMI 415 Orbital with AMI M15 Pipe Welding Head Dual Wire Feed

AMI 415 Orbital welding vision system & unused Model 81 WeldHead
AMI 415 orbital power source un-used with Model 81 is a full function orbital pipe weld head featuring programmable Arc Voltage Control, Torch Oscillation, onboard Wire Feeder and Travel in a very compact package.

AMI 79 -3500 Orbital Open Weld Head
M79-3500 suitable for 1.00" - 3.50" (25mm - 90mm) tube/pipe OD range

AMI 79 -4500 Open Weld Head
M79-4500 suitable for 1.90" - 4.50" (48-114mm) tube/pipe OD range

AMI 79 -6625 Open Weld Head
M79-6625 suitable for 2.00" - 6.625" (50-170mm) tube/pipe OD range

AMI 79-2375 Open Weld Head
M79-2375 suitable for 0.75" - 2.375" (19-16mm) tube/pipe OD range

AMI 8-2000 Closed Fusion Orbital Weld Head
M8-2000 orbital weld head suitable for 0.25" - 2.00" (6.3-52mm) tube/pipe OD range.

AMI 8-4000 Closed Fusion Weld Head new and used
M8-4000 suitable for 0.50" - 4.094" (12.7-104mm) tube/pipe OD range

AMI 8-6625 Closed Fusion Weld Head
M8-6625 suitable for 2.00" - 6.625" (51-159mm) tube/pipe OD range Designed for fusion TIG welding of tube, thin wall pipe and fittings

AMI 9 -3500 Fusion Weld Head
M9-3500 Suitable for 1.00" - 3.500" (25.4-88.9mm) tube/pipe OD range

AMI 9 -500 Orbital Fusion Weld Head
Orbital welding M9-500 copy suitable for 0.093" - 0.500" (2.3 - 12.7mm) tube/pipe OD range

AMI 9 -750 Fusion Weld Head new and used also AF model in stock
M9-750 suitable for 0.125" - 0.750" (3.2-19mm) tube/pipe OD range COLLETS ALSO IN STOCK

AMI 9-1500 and 9-1500E Fusion Weld Head new and used
M9-1500 suitable for 0.250" - 2.500" (6.3 - 38.1mm) tube/pipe OD range

AMI 9-2500 Closed Fusion Weld Head and 9E-2500 new and used
AMI 9-2500 Closed Fusion Weld Head

AMI 9-4500 & 4500E Orbital Weld Heads new and used
Both Orbital weld heads can be changed to double clamp if required 9-2500 and 9-4500

AMI 9-4500E and 9-2500E Orbital weld head Conversion kit
AMI 9-4500E and 9-2500 Conversion kit for orbital weld heads

AMI 95 -1500 Open Weld Head
M95-1500 suitable for 0.625" - 1.50" (16-40mm) tube/pipe OD range

AMI 95 -2375 Open Weld Head
M95-2375 suitable for 0.75" - 2.375" (19-61mm) tube/pipe OD range

AMI 95 -6625 Open Weld Head
M95-6625 suitable for 2.00" - 6.625" (50-170mm) tube/pipe OD range

AMI 95 Low profile feed unit
AMI M95 Low profile feed unit

AMI 95 -WF Wire Feed for orbital welding
Model 95 - WF wire feeder is a compact, portable unit designed specifically for use with all Arc Machines, inc M95 series weld heads

AMI 9-500 Orbital Welding Head
Orbital welding M9-500 copy suitable for 0.093" - 0.500" (2.3 - 12.7mm) tube/pipe OD range

AMI 95-3500 Orbital Open Weld Head
AMI 95-3500 Open Weld Head

AMI 9-7500 Closed Weld Head
Arc Machines, inc M9-7500 weld head

AMI 9AF-900 Orbital Welding Head

AMI Arc Machines Inc Model 96 Tube to Sheet Weld Head
The Model 96 is an automated weld head designed for high-speed, high-production autogenous welding of tubes to tubesheet.

AMI Arc Viewing Camera System for Orbital Welding
Allows viewing and monitoring of the arc for consistent welding

AMI ESAB 6 Orbital weld head tube to sheet, model 6
The Model 6 is a rugged, field-proven weld head for high-production welding of Orbital tube-to- tubesheet using the GTAW process.

AMI guide rings various sizes new and used
AMI M15 rings various sizes

AMI M15 orbital Pipe Welding Head
Single wire feed M15 large diameter pipe welding head with model A torch

AMI M15 Pipe Welding Head with Dual Wire Feed
Dual wire feed M15 pipe welding head with model C torch

AMI M217 Orbital welding power supply
AMI 215 Orbital welding power supply with cooling

AMI M317 Power Supply, top assy, fixed
With 100% duty cycle the AMI Model 317 orbital welder provides the highest power/weight ratio in the industry.

AMI M81 new & used rings for orbital welding, heads also in stock.
More details to follow

AMI M81 Pipe small Orbital Weld Head AS NEW used also in stock
The M81 is a fully functional orbital pipe weld head

AMI M9-2500 Fusion Weld Head
AMI 9-2500 Closed Fusion Weld Head

AMI M96 Orbital Mandrel
19,2 mm and 25 mm

AMI Model 6 Tube-to-tubesheet weld head
The Model 6 is a rugged, field-proven weld head for high-production welding of tube to tubesheet using the orbital GTAW process.

AMI Model 85 -650B Return Bend Fusion Weld Head
Fusion weld head is available @ £900 GBP

AMI Switching M227-DX Dual weld head 227M3E0110A-00
Do you require multiple weld heads for your orbital welding application? Do you need to simplify the weld head exchange calibration process or increase the number of welds your machine produces?

AMI Vision system could be used on other systems like subarc or tig
AMI’s state-of-the-art Active-Filter Vision System provides the industry’s best and most flexible welding arc monitoring and recording system.

Anti Creep for use with welding rotators
Anti Creep to suit welding rotators

Arcair Slice Cutting System
Unlike any other cutting technology used today, the Arcair Slice system can cut, burn or pierce virtually any metallic, non-metallic or composite material

Armco Column and Boom with Lincoln NA5 SubArc DC 655 power source
This Lincoln SAW Column and Boom welding package can be purchase from £5000 GBP in "AS IS" condition without warranty

Aro Ergoweld 13K Spot Welder for Bodywork repair
Aro Ergoweld 13k motor body repair 13000A - 400V Inverter spot welder

Auto Cold Wire TIG Feed for AC/DC TIG Welding
This unit is designed as an easy add on for all TIG welding machines & torches for hand welding or automatic welding of all metals. Ideal for many applications such as metal cladding, pipework,

Avery-Denison Hardness Testing Machine
For testing the hardness of hard alloys and steels

Axxair 121ECO1 Cutting 5 to 121mm with electric Metabo 1300W
If you are looking for proper tube preparation to produce a proper weld then the AXXAIR + Metabo Cutter will do the job

Axxair DC115-BM/AM1 Orbital facing machine Dia ø12 - ø115mm AS NEW
Tube facing is used on thin tubes with a thickess of less than 3mm.

AXXAIR DC25-MS ø3-ø25.4mm Orbital face dressing machine AS NEW
Looking for tube face machine to tubes with a diameter ø3 - ø25.4mm ? This used Axxair DC25-MS will bring conformity to tubes less than 3mm (material specific)

Axxair DC65 Orbital tube face dressing machine ø3 - ø63.5mm AS NEW
An ex-demo condition Axxair DC65-MS2 orbital facing machine with to suit tube diameter ø3 - ø63.5mm

AXXAIR GA122 Beveller Diameter ø15 - ø119mm AS NEW
An ex-demo Axxair GA122 bevelling machines for all types of steel, and alloys with a tube diameter ø15 - ø119mm

Axxair Orbital Beveling Machines: 15 to 328mm OD
Axxair GA Beveling machines for diameters ranging from ø15 - ø328mm. Success of orbital welding relies mainly on the preparation of the parts to be welded.

Axxair Orbital Saws for cutting tube and pipe range from 5mm to 328mm
AXXAIR CC orbital cutters are the ultimate solution for quick and clean stainless steel tube and pipe cutting - various models available

Axxair SATO Orbital Open Weld Head with options for wire feeder
Various models of SATO series open orbital welding head to suit Axxair SAXX orbital welding system

Axxair SAXX-200 Orbital welder - compatible with other makes of head
This used Axxair orbital TIG welding power source is also compatible with closed welding head from AMI, Polysoude, ESAB, Orbitec and Orbitalum

Axxair SAXX-201 Obital welder Swagelok fitting with SAMX-17/ 5 Series
The GTAW orbital tube welding power source from Axxair is easy to use, with simple and intuitive so it's easy to generate programs. Works on Swagelok fitting using the SAMX-17 weld head similar to the 5 Series head

Axxair SAXX-201 Orbital TIG Power Source with SATFX Closed heads
Axxair SAXX-201 Orbital TIG Power Source with SATFX Closed heads

Axxair SAXX-201DGIW Orbital 200A wifi antenna and wire feed
Brand new and in stock now. SAXX-201DGIW Orbital TIG GTAW welding power supply,

Axxair SAXX-210 Orbital with SATO 115E Open Weld Head
Axxair SAXX-210 Orbital water cooled

Axxair used Orbital Saw for cutting tube and pipe models CC121/CC172
AXXAIR CC121 orbital cutter is the ultimate solution for quick and clean stainless steel tube and pipe cutting.

B-2 Manual Solid Turntable with Back Purge through Hole
Suitable for TIG or Plasma applications. Hole thru 6.35mm (1/4").

B-3 Positioner with Back Purge through Hole 6.35mm or 30mm
New version of the popular Model B welding turntable suitable for TIG, Plasma or MIG welding applications.

Baykal plasma Head and Tail stock on base rails with idlers
Baykal plasma tube/ box section bed with powered drive and idlers 12 to 500mm was lasted unit with Baykal cnc flat bed plasma

Binzel ABICOR Alu Power Drive APD MF

BOC ESAB Falcon and Kestrel spare part & miscellaneous Items
Most parts in stock to suit the older magic eye scanner type profile cutter as cnc units

Boc Hancock Profile scanner tracker
This used tracker scanner system was removed from a BOC Falcon SP

BOC Kestrel and falcon scanner
Old style BOC scanner magic eye for Kestrel or Falcon profile cutting machine

BOC pug gas cutting track
Track to suit BOC oxy fuel portable cutting machine

Bode 10VH 500kg Welding Positioner
BODE Type 10VH Welding Positioner with adjustable height

Bode 150VP 7.5 Ton Welding Positioner
Variable speed power tilt with pendant control

Bode Head and tail stocks HT200, HT100,HT60 and HT10
Head and Tail stocks used for positioning your work piece

Bode VP/5 5 Ton Welding Positioner
British made Bode VP/5 5 ton welding positioner

Bode 1/CR-40 Sizzer Welding Rotators 2 ton capacity
Load Capacity – 2 Tonnes

Bode 2 VP/5 5 ton Welding positioner
British made Bode 2 VP/5 5 ton heavy duty welding positioner

Bode 2-HSW 6 /44 Elevating Longitudinal Seam Welding Machine
Bode 2-HSW 6 /44 elevating longitudinal Seam Welding Machine, powered raise and lower

Bode 3 TRMB Travelling Column and Boom Welder
The Boom welding manipulator is a full package consisting of seam tracking and motorised slides

Bode Double Ended Longitudinal Seam Welder
Bode double ended seam welder Length of seam capacity 1250mm

Bode PCB manual Column and Boom welder
For only £900 you can purchase this British Bode Column and Boom welder. 2.3 x 2 (sizes to be confirmed)

Bode travelling base only - from C&B
Bode travelling base removed from TRMB Column and Boom welder and replaced with fixed.

Bode TRMB Column and Boom with Lincoln SubArc 4m x 3m
Bode TRMB 3m x 4m Welding Column and Boom with Lincoln Electric Idealarc DC welding power supply and Lincoln SAW head

Bode VP100 5 Ton Welding Positioner, Positionneurs, Posicionadores
A British Bode welding positioner with a carrying capacity of 5000kg

Bode VP100 5 Ton Welding Positioner. Bespoke refurb on request
Here's a chance to have the top engineered welding positioner, refurbished. A pendant control comes as standard on this 5000kg powered table

Bode VP100 5000kg Welding Positioner with Adjustable Height
British made Bode positioners offer unbeatable qualtiy. With variable speed, power tilt, adjustable height and pendant control

Bode Welding Column & Boom ESAB PEK subarc system SAW
Bode RC Columnn and boom 4500mm x 6000mm fitted with ESAB PEK and ESAB laf power source with motorised ESAB PAV and remote

Bode welding lathe for dished ends or seams
Bode Lathe Type Positioners Automated Circumferential Welders are machines proven to cover a wide range of circumferential welding needs with Mig, Tig or sub-arc capability,

Bode Welding positioner adjustable height with hole thru
This British elevating welding positioner, with a table diameter of 500 mm comes complete with Gullco 200mm quick release chuck with hole thru table of 75mm

Bolzenschweißtechnik stud gun
Bolzenschweißtechnik APT-8 Stud welding gun

Bugo K-BUG 6100 all position linear weave welder
The KBUG-6100 is a compact portable welding unit with an integrated linear weaver for all position welding.

Bugo MDS 1003 stitch module carriage
MDS-1003 Stitch Module

Bugo Mini-Vert Seam Welding Tractors
The Mini-Vert III is a compact, lightweight battery powered welding travel carriage.

Burny 10 plus Unit for mechanised CNC profile cutting Systems
Burny 10 LCD Plus CNC unit

Burny 2.5 RS232/422 CNC Unit
Computer numerical controls for gas or plasma profile cutting tables

Burny 5 CNC Unit
Upgrade or retro-fit your existing profile cutting machine

Burny motor mt 2630-141with bison gear box and others

Burny Replicator in stock 1100 and 1400 in stock
Burny Replicator CCD and none CCD in stock sold working or spares if required

Burny Servopak 250
Burny servopak 250

Calibration on your Orbital welding machine
Calibration of GTAW Orbital welding machines now available

Calibrator 600 PRO Load Bank
New Calibrator Units Made in Britain for all welding processes MIG/MAG, AC/DC TIG/WIG, MMA, SUB ARC, PLASMA Welding. (MCAW, FCAW, SMAW, GTAW, SAW).

Calibrator 600/1000 amps AC/DC for Welding Machine Calibration
New units made in Britain comes with traceable Calibration Certificate plus CE declaration of conformity

Calimeter 602 meter kit with instant calibration
The Calimeter 602 gives an instant calibration status on any DC MMA/Mig power source in compliance with BS EN 50504:2008 (calibration of welding equipment) and ISO 9000 (quality systems)

Car Body pulling kit with sliding dent pulling hammer PEI and Tecna
Car Body pulling kit with slding hammer PEI and Tecna

Cast iron box tables setup beds
Cast iron box tables

Cat GC Site Generators
Cat DE150 GC 150kva site generators.

CEA PPN-28 Projection spot, resistance and projection welding
New Arms to be fitted.

Chevalier Mill Chevalier Mill
More details to follow Removed from site working

Chuck 3 jaw diameter 1000mm
Chuck 3 jaw diameter 1000mm

Chucks for Holding Clamping Welding Piece
Various Sizes of 3 Jaw and 4 Jaw sizes from 200,300 400 and 530 sizes in stock

Climax BW1000 Auto Bore Welder kit
The Climax BW1000 Auto Bore Welder is an automated spiral welding system. Intended operating welding range. Bore Dia 1"- 24" and Bore Depth 3.5" - 30"

Climax Model BB4500 Portable Line Boring Machine
MODEL BB4500 BORING BAR METRIC 120V 4SPD REV SINGLE ARM CONES CONTROLLER CE

CLOOS GLC 503 CAPO Water Cooled MIG Welding Package
Quinto MIG welder sets has a CK 78a wire feed system fitted

CNC USB Adaptor to be Used on Burny Etek CNC Systems new and used
The Basic Omniport Adaptor has been designed to work with all Burny 3, Burny 5 and 1250 systems.

Colchester Lathe Co. 5 x 20 Chipmaster Lathe
Removed from site fully working

Cold wire feed manual l tig feed 15k spool 220 volts
Cold wire feed manual l tig feed 15k spool 220 volts can be used with any ac/dc tig

Cooperheat Stork Cooperheat 41757 Thermocouple Attachment Unit
Stork Cooperheat’s Automatic Thermocouple Attachment Unit (TAU) with a 110V battery recharge supply enables direct attachment of thermocouples to a work piece using the capacitive discharge method.

Dantherm Type Filters Type 40 none bonded
Dantherm Type Filters Type 40 none bonded 40 x 865mm

Dimetrics orbital weld head with remotes no power source
We are selling this Liburdi Dimetrics orbital open weld head with remotes but no power source

Double Roll Pipe Stands manual adjustment, WestWorld
Roller adjustment for either side

Drill Pillar type
This NuTool Pillar Drill is being sold in "as is" condition and not tested

Dynetic Systems Motor with Bison gear box
Dynetic systems motor with bison gear box

ESAB 30+ Cutmaster, 230 V 1 ph, CE/UKCA
When it comes to finding the ultimate plasma cutter, Cutmaster + is the perfect answer

ESAB 5000i MIG welder with Feed 3004 and U6 Controls
Aristo Mig 5000i with feed 3004 with Aristo MA6 controls with pulse

ESAB EM501iw Water Cooled Fabricator
Fabricator are heavy duty inverter controlled power sources for MIG/MAG and MMA (Stick) welding. Built to withstand rugged use which makes it a perfect solution for industrial usage.

ESAB EPR-X1 Powered Air Purifying Respirator Unit
ESAB’s EPR-X1 PAPR unit connects seamlessly with all current ESAB prepared for air welding helmets and provides advanced respiratory protection from harmful welding fume particulates.

ESAB Flux Recovery
Air powered flux recovery

ESAB ME21 Wire Feed

ESAB 4004i Pulse MIG Welder with U8 Controls & 3004 Feed
ESAB's Aristo 4004i Pulse power source provides substantially improved arc welding performance.

ESAB A2 PEI Process Controller
Control system for A2 tractors and A2 welding heads Analog type that can control most brands of power supplies.

ESAB A2 Sub Arc Welding Packages PEH Controls SAW with 15m of cable
ESAB A2 Sub Arc Welding Tractor with PEH Controls, LAF 1000 with 15m of cables

ESAB A2/A6 Beam Travelling SAW 8m x 3m frame with PEH controls
For Beams and Cylinder welding. I, T, H and Box beams the used ESAB A2/A6 subarc welding Beam travelling carriage is complete on an 8m x 3m frame

ESAB A2/A6 PEG1 Display - New 341844-001B
A2/A6 ESAB PEG1 Display A2 LAE Control PCB

ESAB A2/A6 SAW Beam Travelling carriage on 8m x 3m frame With PEK
ESAB A2/A6 Beam Travelling carriage on 8m x 3m frame

ESAB A6 Heavy Duty Manual Slides from £300 each
Different sizes in stock for X and Y movements

ESAB A6 Mastertrac Seam Welding Tractor package or Arcmaster head
Heavy duty DC welding rectifier for SMAW welding LAF 1000 or LAF 1250

ESAB A6 PAK Motorised Slide Control With 1 slide
Various size slides in stock

ESAB A6 PEF Submerged Arc Welding Heads for SAW or A6Tractor
Full Package with Manual Slides

ESAB A6 PEF, Flux Hopper subarc welding welding tractors
With ESAB A6 Head, Flux Hopper and manual slides

ESAB A6 SAW Tandem Mastertrac with ESAB LAF 1251 with TAF1251 SAW
ESAB Mastertrack PEK With ESAB LAF 1251 with TAF 1251 Rectifiers for Submerged Arc Welding working range Length of the cables is 24 m.

ESAB A6/A2 SubArc tractor option for twin head + LAF 1250 with TAF AC
Heavy duty DC welding rectifier for SAW welding with flux recovery

ESAB A6/A2 SubArc Weld Tractor + PEG1 + LAE welder SAW
Volts, Amperage and Travel Speed can be programmed prior to welding

ESAB Aristo LUD 450 MIG Welder with wire feed unit
The ESAB Aristo LUD 450 Synergic pulse MIG welder which can be supplied as a gas or water cooled package

ESAB BOC CoolJet Gas Cutting posts
esab boc hancock motorized gas cutting posts

ESAB BOC Kestrel CNC Gas Profile cutter /w Scanner System
This profile cutting table is fitted with both Scanning system and Burny 2.5 RS232 CNC unit with software (Refurbished sometime ago but was that good we decided to buy it back)

ESAB C2002i Orbital welders with open head prb 33-90
Open head PRB 33-90MM Tube-to-tube

ESAB CAB 460 Column & Boom
ESAB CaB offer a totally integrated solution including welding process, manipulator movement as well as control of third axis products like the ESAB roller beds or positioners

ESAB CNC Control Unit and Cutting Spares
ESAB Cutting Posts

ESAB CNC motors and gear box m642/T
Priced as each

ESAB Column and Boom Lincoln NA5 and DC 1000 SAW optional
ESAB Column and Boom with optional Lincoln NA5 and DC 1000 SAW

ESAB Column and Boom Lincoln NA5 and DC 1000 SAW optional
ESAB Subarc welding manipulator with or without Lincoln Electric NA5 and DC 1000 power source for submerged arc welding

ESAB Cutmaster CM40 Manual Plasma System
12mm genuine cutting capacity, 15mm maximum cut, 20mm severance

ESAB Eagle 3000 CNC plasma cutting system with plasmarc units
ESAB CNC plasma cutting table complete with

ESAB ECM 120 Cutmaster plasma cutter
ESAB Cutmaster 120 provides 120 amps of cutting power for a 40mm (11/2”)

ESAB EM401i Fabricator last one at old price gas cooled package
An brand new ESAB 401i is a heavy duty inverter controlled power source for MIG/MAG and MMA stick welder fitted with ESAB Fabricator 304 Wire Feed unit

ESAB ESP 50 Air plasma cutter
The ESAB ESP-50 is a compact, completely self-contained manual plasma cutting system complete with ESAB PT-35 cutting torch.

ESAB Flux Recovery FFRS 2000
ESAB flux recovery and flux heater (with optional Nederman fume extraction)

ESAB LAD AND ESAB LAE spares pcb switches ect
esab lae and lad 800 and 1000 for spares/repair prices from 800

ESAB LAE 1250 DC Sub Arc Multi Process
ESAB constant voltage thyristor controlled automatic welding power source

ESAB LAE 1250 Welding Power Source
ESAB constant voltage thyristor controlled automatic welding power source for submerged arc and MIG/MAG welding and carbon arc gouging

ESAB LAE 1600 amp DC Welding Power Source
ESAB constant voltage thyristor controlled automatic welding power source

ESAB LAE 800 amp DC Multi Process - Heavy Duty Welder
110 and 42 volts

ESAB LAF 631/635 DC mig/subarc welding power source - 2 can be linked
Extended welding current by connecting two power sources in parallel for demanding applications

ESAB LAF DC 1000 amp welding power source
ESAB LAF 1000 amp Welding Rectifier used in conjunction with ESAB PEH or PEI Process Controller

ESAB LAF DC Power Sources + Subarc Beam-travel carriage
Three-phase, fan-cooled DC welding power sources designed for high productivity automated submerged arc welding (SAW) or high productivity gas metal arc welding (GMAW)

ESAB LHF 400 amp DC Power Source for MMA (Stick) Welding
The LHF 400 welding rectifier is designed to meet the highest expectations in terms of robustness and operational performance and reliability

ESAB MechTIG 250 Orbital Welder, tube to tube
ESAB Orbital welding system with choice of open heads

ESAB Mech-tig 4000i orbital welding system power source heads in stock
Full system includes ESAB type PRC 33-90 or PRC 60-170 Narrow Gap Welding System Head with Mechtig 4000i Welding Power Source

ESAB MIG 5000i Aristo MIG welder with U8 controls
This Aristo 5000i power source provides substantially improved arc welding performance

ESAB MIG wire feed unit, model 3004
ESAB 3004 wire feed unit

ESAB Miggytrac 1000 Seam Welding Tractor
Designed for MIG/MAG welding of plates and beams.

ESAB motor to suit motorised
24 volt motor

ESAB Motorised CoolJet Cutting Posts
For Gas Profile Cutting Beds

ESAB motorised cutting posts
Burny Motorised gas cutting posts

Esab Prowelder LTS 160 Orbital Welder Tube to Tube
ESAB Orbital welding system with choice of open heads

ESAB Subarc slides with or without A6 motor
ESAB SAW manual slides with insulators

ESAB Suprarex 7000 SXE HD Dual Fuel Plate cutter with Bevelling Torch
We are selling this 2013 ESAB Suprarex HD 7000 oxy-fuel and plasma profile cutting table

ESAB Travelling Welding Beam Carriage, Model A6B SAW
The carriage travels along an I beam

ESAB UXC Control unit with or without Burny 2.5 CNC
ESAB UXC motors and gear boxes 280 Control unit with scanner and Burny 2.5 cnc unit

ESAB/BOC Falcon magic eye/cnc Profile Cutting Machine
ESAB/BOC Falcon Gas Profile Cutting Machine - Flame Cutting Metal Plate

ESAB/LINDE Digimatic MIG Micro processor controls

Esprit Lightning HD CNC Plasma Cutter Hypertherm HPR130 HyPerformance
British made Esprit Automation CNC cutting table is fitted with a Hypertherm 130 Plasma cutter

Esprit Arrow CNC Plasma with Hypertherm Powermax 45 & Edge Pro
Esprit Arrow CNC Plasma Profile Cutting Machine with Hypertherm Powermax 45 plasma cutter

Esprit Automation S2000 CNC with Edge Pro Controls HPR260 XD
CNC plasma cutting system with Hypertherm Edge pro CNC unit

Esprit Lightning 1500 CNC Plasma Hypertherm HPR130 XD HyPerformance
Esprit Lightning 1500 CNC Plasma cutting table with HyPerformance Plasma 130 XD

Esprit Lightning HD with Hypertherm XPR170 Plasma cutter AS NEW
Esprit Lighting HD1500 CNC Plasma cutting table complete with Hypertherm XPR 170 Plasma Cutter

Esprit Lightning HD2500 CNC plasma with HyPerformance HPR 260
The Lightning HD plasma cutting profile table made by British Esprit Automation with Hypertherm HyPerformance plasma

Esprit Motors s644 3A/T X AND Y also E19-3
Esprit CNC plasma profile cutting motors s644 3a/t and others

Esprit plate rider bearing with valves - plate cutting machine
To suit Esprit CNC plasma profile cutting system

Esprit Viper CNC Plasma cutting table with HPR 260 and gas
PRICE DROP - Esprit Viper 4000 CNC HD Plasma & Gas profile cutter, heavy duty precision plate cutting machine for the most demanding workshop

EWM Tetrix AC/DC Plasma Welder with Hot Wire Unit & Chiller
DC plasma welding machine with Synergic front control

EWM Triton 400 MIG Welder with Wire Feed

Extractability Fume Extraction Inspection/Service/LEV Test
Due to the continued widespread occurrence of occupational lung diseases in the UK HSE published a guide - HSG258 on LEV for employers and their employees who depend on LEV systemsto protect their health.

Extractability Telescopic Fume Extraction Arm
The Extractability range of telescopic suction arms are available In different versions

Facing tool

Fastspotter Hand Held, Single Sided Spot Welder
Hand held, single sided spot welder for poke, micro, and seam welding

FastSpotter Single Sided resistance seam, Spot, studder & Micro welder
Resistance spot welder For Mesh - Pellet Welding and for heat insulation on exhaust systems now with the new px1700 controls

Fiber Laser Welder 1.5kw, Double Wobble Head with Feed 220V
Fiber Laser welder 1.5kw with double wobble welding head with wire feed unit

Fibre Laser Cutter 3kw compact cell for sheet plate
The industrial solution Fibre Laser for sheet metal cutting of flat plate in a compact foot print

Filter Super 2000 x T5
Super Bag 2000 xt15

Fluidair compressed air dryer
Fluidair compressed air dryer

Franzan Resistance Circumferential or Longitudinal Seam welder
Franzan Resistance Seam Welder for Circumferential or Longitudinal welds

Fronius ALU TransPuls Synergic 2700 water cooled MIG MAG welder
TransPuls Synergic 2700 for short circuit, spray and pulsed arcs is a fully digitised and microprocessor-controlled MIG/MAG power source with an output of 270 A

Fronius ArcRover 15 Welding Tractor
WELDING CARRIAGE FOR MECHANISED LONGITUDINAL SEAM WELDING

Fronius Compact Hot Wire Weld Cladding Station controller HMI-T10CC
Fronius Compact Hot Wire Welding Cladding Cell with system controller HMI-T10CC. This full system has been regularly calibrated and serviced by Fronius

Fronius Deltaspot X500 Resistance Spot welding system
For the automotive industry, railway construction, aerospace industry or for manufacturing of white goods this spot welder will deliver 4000-7000 spots without interuptions

Fronius FPA 9000 Compact Hot Wire Weld Cladding Station
Fronius Cladding. Weld overlay is a process that provides protection for metallic components by welding a layer of corrosion-resistant alloy to areas at risk of corrosion and wear.

Fronius fume extraction torch
Gas cooled smoke extractor torch.

Fronius Magicwave 3000 AC/DC TIG Welder water cooled
Suitable for AC and DC TIG welding, DC TIG welding and MMA welding for the professional welder

Fronius MagicWave 4000 AC/DC TIG welding machine
The MagicWave is a completely digitised TIG AC/DC power source that is used especially for aluminium applications

Fronius Magicwave 4000 ac/dc TIG with KD 7000D-11
The MagicWave 4000 is a fully digitally controlled TIG AC/DC welding power source with Active Wave technology and is distinguished by an almost soundless yet highly stable arc.

Fronius TIME TWIN MIG welders, water cooled with remote
MIG Twin welding systems, water cooled

Fronius TPS p/s only or with robot interface. also Fronius remote RCU
Multi-Process MIG CV/Pulse, TIG DC & Stick Electrode Welding

Fronius TR4000 C Remote for MIG welding

Fronius Transpocket 4000 MMA Power Source
Transpocket 4000 CEL4000

Fronius Transpuls Synergic 5000 CMT MIG welding system
Fronius Transpuls Synergic CMT 5000 Water Cooled Mig Welder CMT - EX DISPLAY.

Fronius TransPuls Synergic 5000 MIG Welder
The fully digitised and micro processor controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect The multi process power source is suitable for MIG/MAG, TIG and electrode welding

Fronius Transpuls Synergic 5000 MIG welder VR7000 Wire Feed
The fully digitised and micro processor controlled MIG/MAG power source for short circuit, spray and pulsed arcs enables the best weld properties in every respect The multi process power source is suitable for MIG/MAG, TIG and electrode welding

Fronius TransSynergic 4000 MIG welder
Fronius water cooled Trans Synergic 400 amp MIG welding package, water cooled with separate v4000 feed unit and 5m of cables

Fronius Transtig 4000 DC TIG Welder, Water Cooled
The Fronius Transtig welding system is suitable for DC TIG welding and MMA welding

Fume Extraction bench System for Welding and Grinding Applications
ProtectoXtracTop is a retrofit-able filter unit that enables the ProtectoXtract to be used for grinding applications.

Gas Profile Cutting Posts, Cooljet, ESAB, Harris, etc
Refurbish your existing Posts

GEN-200DH Honda Petrol Welder Generator
This Honda petrol engine welder generator, model MPM 5/200 I-EL/H Petrol

Gen-Set Gen-300IK Diesel Welder Generator
This new engine driven welder generator by GenSet is model MPM 8/300 I-K Static

Genset GEN-400DK Diesel welder generator
MPM 15/400 Diesel welder generator

Goodwin P20 Plasma Cutter with Built in Compressor 3 ph. 50mm Cut
The power unit is of robust quailty construction incorporating a recirculating water cooling system the oil cooled transformer gives up to 20kw of arc power @ 100% duty cycle

Gullco 10 A-20, 10 B-20 Portable Welding Electrode Oven
Model 10 A-20 operates from 115V or 220V AC/DC input power, 10 B-20 115V AC only or 220V AC/DC supply

Gullco 171 and 191 Tractor Spares, SW Seam Tracker Spares
Gullco motorised slides motors and rack box spares

Gullco Arcair-Matic N7500 Gouging System
The Arcair-Matic N7500 gouging system is highly productive for any metal fabrication operation where gouging and welding represents a large portion of the work schedule.

Gullco Ceramic Weld Backing
Advantages of using KATBAK ceramic weld backing:

Gullco Flux Holding Hopper GOV-100-FH - New
This 100 lb. capacity flux hopper is designed for mounting either directly above the welding head or on the welding manipulator to maintain the flux in its original dry state.

Gullco GBM 28U Heavy Duty Weld Joint Bevelling Machine
The Gullco GBM28U bevels stainless steel, aluminum and mild steel ranging from 6mm to 50mm maximum bevel width is 28mm

Gullco GK171-90 Straight Line Welder for Longitudinal Seams
Manual X and Y Slides

Gullco GK200 orbital welder with oscillation with straight/flex track
Improve production with this and get rid of poor penetration, incomplete fusion, overlap and undercut by purchasing a Gullco KAT automation system

Gullco GOV 200 FD Flux Oven
This insulated 200 lb. capacity Flux Holding Oven is generally located in the storage area and is used to keep the flux in its dry state or to dry out flux that has picked up moisture.

Gullco GOV 600 Sub Arc Flux holding oven UNUSED
High Temperature Flux Holding Oven - 265kg Capacity. 100-850° F (38-455° C) 11400 Watts, 440v 3ph GOV-600-FDHT

Gullco High Temperature Flux Oven GOV-600-FDHT - New
Temperature range 100-850°F, (38-455°C)

Gullco Holding Oven GOV-600-FD3 - New
Divided into 3 compartments, 200 lbs each compartment.

Gullco Idler Carriage Trailer
To be used with any Gullco Tractor to carry a Wire Feed behind the Tractor

Gullco Kamel Portable Automatic Pipe Welding Rotators
Reduce pipe preparation costs with this rugged, portable equipment which rotates pipe from 2” to 16” (51 - 406mm) diameter, 750 lb/340 kg load weight

Gullco KAT 300 Welding and Cutting Oscillation Combination Carriage
The Gullco KAT is used throughout the world to automate a wide variety of welding and cutting applications

Gullco KAT GK-200 Flex Track Travel Carriage - New
Programmable, low voltage, all positional and variable speed, oscillation models available

Gullco KAT GK-200 Rigid Track Travel Carriage System
New carriage welding package which is programmable, low voltage, all positional with variable speed

Gullco KBM 28 plate edge bevelling machine Save £££ off new price
The Gullco KBM28 bevels plates of stainless steel, aluminium and mild steel ranging from 6mm to 50mm maximum bevel width is 28mm

Gullco KBM-15 Handheld Bevelling Machine - New
Adjustable bevel angles from 15° to 60°

Gullco Mobile Flux Oven GOV-100-PFD
Used units in stock, new also available to order.

Gullco Model 1000 Compact Welding Electrode Oven
454kg capacity, compact modular design with control recessed for protection

Gullco Model 350 Compact Welding Electrode Oven
159kg capacity, compact modular design with control recessed for protection

Gullco Model 50 Portable Welding Electrode Oven
A lightweight, rugged and portable solution for electrode stabilizing.

Gullco Moggy GM-01-050 Straight Line Seam Welding Tractor
Moggy controls for continuous travel, forwards and reverse, start and stop, wire feed start and stop

Gullco Motoried Slides X & Y Accessories
Variable speed with manual joy stick on pendant control

Gullco PipeKAT Automated Orbital Pipe Welding System
All Models - 1.35” - 44.2” (3.42 – 112.2 Cm/Min) welding carriage with quick action mounting for ease of installation.

Gullco Plate Bevelling Machine KBM-18 - New Equipment
Portable plate edge bevelling machine, self propelled with adjustable bevel head

Gullco Plate Bevelling Machine KBM-28 - New Equipment
Portable heavy duty plate edge bevelling machine, self propelled

Gullco Round Section Track
1200mm Diameter

Gullco round track
700 diameter last used on 24" pipe with adjuster can be used on smaller pipe with longer adjusters

Gullco round track various sizes
Gullco track

Gullco Sam Carriage
SAM Carriage, Model GM-02-295 - Friction drive heavy-duty travel Carriage, with positive chain drive on four(4) rubber tired wheels

Gullco Seam Tracker Welder Model WSG 1100 Complete or as spares
Gullco Seam Tracker Welder Model WSG 1100 as spares or as working unit ready to use

Gullco track - Used
Gullco 2.8m long standard track 14 lengths price each

Gullco Welding Tractors Miscellaneous Items Spares for Sale
Various Parts and Spares Listed

GYS 400T G Kronos MIG with WF 35 Wire Feeder, Torch and Earth Clamp
The Kronos 400T G is a three-phase, multi- process power source with separate wire feeder. It's innovative technology ensures excellent arc characteristics for the most demanding MIG/MAG applications.

GYS 400T Kronos Duo 1 with 4m torch compact MIG welder
GYS 400T Kronos Duo 1 with 4m torch and earth clamp compact MIG welding machine

GYS Capatek 66 FV CD Stud Welder
GYS Capatex 66 fv CD stud welder with a choice of Retraction Gun or Contact gun for welding on thin sheet metal without marking or deformation

GYS Magys MIG Welding Packages with Synergic Capability
The Magys are a range of heavy duty MIG welding machines with wire feeder are a 3 phase, synergic system

GYS Neocut 105 Plasma Hand Torch Package or machine torch
105 is a plasma cutter with a duty cycle of 100% at 105 A for cutting work up to 50 mm thick in industrial environments

GYS Neopulse 320 C MIG/MAG Welding Machine double pulse
NEOPULSE 320C is a digital 3 phase MIG/MAG pulse welding machine. It uses the latest technology to ensure the highest performance level.

GYS NeoPulse 400G Double Pulse Water Cooled MIG Welder
The NeoPulse 400G is a pulsed MIG/MAG welding system designed for the highest performance level with double pulse

GYS Nomadfeed 425-4 MIG/MAG welding
Electronically controlled wire speed adjustable using the potentiometer at the front of the machine.

GYS TIG 201 AC/DC Gas Cooled Package
Welding current : 10 to 200 A (TIG AC), 10 to 160 A (TIG DC)

GYS TIG 220 DC HF TIG Welder
Single phase, 220 amp DC TIG welding machine with pulse

GYS TIG 300 DC TIG Welder
3 phase, 300 amp DC TIG welding machine with pulse

GYS Titanium 230 AC/DC FV TIG Welder
The TITANIUM 230 AC/DC FV is a single-phase AC/DC TIG welding Power Source

GYS Titanium 400 AC/DC TIG Welding Package
High performance AC/DC TIG welding package for TIG AC, DC and MMA welding

GYS WAG 40 Tungsten Electrode Grinder
A complete, portable solution to high standard TIG welds via the WAG 40 tungsten electrode grinder

GYSARC 400 TRI MMA and TIG welding system
With inverter technology, the GYSARC 400 TRI is a 3-phase MMA (SMAW) / TIG (GTAW) welding power source with exceptional welding performance.

Hancock BOC ESAB control unit with Burny 2.5 CNC
To suit profile cutting machine

Hierarchy Hf add on units
voltage of any DC power source (petrol or diesel generators, rectifiers, inverters etc.) and can be used with one or two piece torches.

High Low Gas System for CNC Gas Profile Cutting System
110, 240 ,42 or 24 volts

Hose to suit Fume Extraction units, 160mm diameter x 4m
160mm diameter Ducting Hose to suit Nederman extraction units and other makes of welding fume and dust extractors

Huntingdon Fusion mpsg-50k Micro Plasma TIG Welding Power Source
Micro plasma 50 0.7 amps to 50 amps

Hypertherm HPR 130 Plasma with Auto Gas, cables & XD Upgrade torch
Hypertherm HPR 130 Auto gas plasma cutter with XD upgrade torch

Hypertherm MaxPro 200 Power Supply 380 Volts Power Supply 380 Volts
The MAXPRO200 plasma cutting system achieves impressive cut speeds, consistent cut quality and exceptional consumable life with air or oxygen plasma gas

Hypertherm Chopper Board to suit 200 100 and 3070 service exchange
To suit Hypertherm Max 100 or 200 plasma cutter

Hypertherm Edge Pro CNC unit in cabinet drive and motors included
Hypertherm Edge pro cnc unit is an easy, reliable computer numerical controller for the cutting industry. Improve cut quality and profitability with Phoenix software in x-y cutting or beveling.

Hypertherm Edge Pro Plasma cutting CNC unit
Hypertherm Edge Pro CNC unit for Plasma cutting machine

Hypertherm HD3070 HyDefinition at present fitted to a Esprit table
The HD3070 can be configured for different cutting applications by providing a selectable current output at 15, 30, 50, 70 or 100 amps

Hypertherm HPR 260XD Plasma cutting system
Removed from a working Esprit CNC plasma cutting table. This used Hypertherm plasma cutter is being offered as a power supply only.

Hypertherm HPR400XD Plasma Cutter
Hypertherm HyPerformance HPR400XD Plasma Cutting power source

Hypertherm HT 2000 Plasma Cutter for mechanised profiler
50mm Cutting Thickness

Hypertherm HyDefinition HD 3070 Plasma with Manual Gas Control
Upgrade your cnc plasma cutting machine easily for a hydef quality cut

Hypertherm HyPro 2000 Upgrade Plasma Torch for High Productivity Use
Compatible with either the Hypertherm Max 200 or HT 2000 plasma power supply

Hypertherm Max 100 Plasma Cutter 32mm Severance Cut
Hypertherm’s MAX100 plasma cutting system is designed for cutting most metals from gauge to 1-1/4 inch (32 mm) thick. In addition to hand cutting,

Hypertherm Max 100 plasma hand cutting torch Unused
We have for sale an unused Hyeprtherm Max 100 plasm cutting hand torch for sale

Hypertherm Max 100D Plasma Cutter Hand or Mechanised
Fitted with Machine Torch

Hypertherm Max 200 Plasma Cutter Max Cutting Thickness 50mm
Heavy duty plasma cutter fitted with Hypertherm hand torch.

Hypertherm Plasma ArcGlide Lifter
The ArcGlide THC offers optimal cut quality, substantially improved productivity and reduced operating costs for plasma cutting applications.

Hypertherm Plasma Cutter and Cutting Equipment Miscellaneous Items for Sale
We are Hypertherm Agents and can supply Used and New machines and spares/parts/consumables

Hypertherm PMX 65/85/105 Hand torch
Hypertherm PMX 65/85/105 Hand torch 15 Deg 25 ft

Hypertherm Powermax 105 SYNC Plasma Cutter
The Hypertherm Powermax 105 SYNC is a next-generation, professional-grade air plasma cutter that dramatically simplifies system operation for cutting and gouging up to 32mm (1-1/4").

Hypertherm Powermax 125 Plasma Cutting System
Handheld or mechanised plasma system for cutting and gouging metal Includes starter consumable kit - delivered ready to cut!

Hypertherm Powermax 45XP Plasma from £2070 GBP Special Price
The Powermax 45XP delivers increased cut capacity - up to 16mm (5/8") metal Includes starter consumable kit - delivered ready to cut!

Hypertherm Powermax 600 Plasma Power Source with Hand torch
Recommended Capacity 3/8" (10mm)

Hypertherm Powermax 65 SYNC Plasma
The Powermax 65 SYNC is a next-generation professional grade air plasma cutter that dramatically simplifies system operation for cutting and gouging up to 20mm (3/4").

Hypertherm Powermax 85 SYNC Plasma Cutter
The Hypertherm Powermax 85 SYNC is a next-generation professional grade air plasma cutter that dramatically simplifies system operation for cutting and gouging up to 25mm (1").

Hypertherm Smartsync plasma machine torch and spares
10,7 m (35′)

Hypertherm XPR300 Plasma Cutter
The most significant advance in mechanised plasma cutting technology redefines what plasma can do

Ideal Werk Flash Butt Welder, Model AS7
The flash welding process is broken down into pre-heating, flashing and upsetting. A high current generates concentrated heat at the surfaces to be welded.

I-Purge 14" 10" and 12 " Inflatable Bladders Huntingdon Fusion and other
inflatable Bladders Modules A & B Manufactured in the USA from the highest quality materials Inflated bladders create an impermeable,

ISOMATIC PW Poke Single Sided Resistance Spot Welder
ISOMATIC precision Welder for single sided welds other hand tools available.

Jetline and Cyclomatic Seam Tracking Controls
Motors and slides and spares also for sale

Jetline Controls for Seam Welding
Selection of Jetline controls

Jetline Feed Unit and Control

Kemper filters 1090452 1090033 Pack of 10
Kemper Smartmaster pre-filter mat

Kemppi Mastertig 2500w AC/DC TIG Welder
AC DC pulse panel this GTAW comes as a water cooled package

Kemppi MLS 3000 Mastertig TIG Welding Machine
300 amp DC TIG welder, the preferred choice for professionals Worldwide

Kemppi 400 amp load bank
Kemppi load bank for testing or Calibration of Welders MMA, TIG, MIG & Diesel

Kemppi FastMig 450 MXP 37 Pipe with Dual Wire Feeder XF 37 NEVER USED
AS NEW - the Kemppi FastMig 450 MXP 37 Pipe with Dual Wire Feeder XK 37 (water-cooled) MIG welding package is the complete solution for welding pipes and plates

Kemppi Fastmig KMS 400 MIG with WFU but without cables
Kemppi Fastmig KMS 400 MIG welding system with wire feed unit. Cables not included and not tested. 2 units for sale

Kemppi Kempact MIG 2530 MIG Welder
x 20 Kemppi MIG welder with separate controls for voltage and wire feed speed. Discover superior arc performance with excellent arc ignition in all situations.

Kemppi Master 2200 DC TIG Welding Package
Superb small and portable GTAW machine. 3 phase DC TIG welding system

Kemppi Master S 500 MMA welding Power Source
Master S model MMA welding machines are designed for industrial use and for welding all kinds of covered electrodes. Master S is also suitable for carbon arc gouging.

Kemppi Pro 400 High Frequency Units to suit the Pro Evolution
The Kemppi Pro Evolution Protig 400 is an HF ignition unit that ensures excellent, stable arc ignition in TIG welding

Kemppi Pro 4200 Evolution Multi MIG/MAG ProMig 530 Wire Feed
The proven Pro-Evolution 4200 power source multi-purpose Rated 400 amp @ 100% MIG TIG or MMA Water cooled welder

Kemppi Welding Equipment Miscellaneous Items
As Kemppi Agents we can supply Used and New machines and various parts and spares

Kemppi welding programs for fastmig pulse fastmig x and kemparc
Kemppi welding software meets a wide range of welding needs in material and gas types

Kingsland 40XM Steelworker
Mechanical steelworer with a pressure of 40 tons. The Ironworker has been developed to perform four basic functions: Punching, Flat Bar Shearing, Angle and Section Cutting

Kjellberg PGE 1-800 KCU2
Gas controls PGE 1-800 and KCU 2

Koco Compact Capacitor Discharge Stud Welder
The KST108 is a compact stud welder equipped with a capacitor discharge and welds steel , stainless steel, aluminium and brass

KOCO ELOTOP 3010 Through-deck welding-TD shear studs + connectors
KOCO ELOTOP 3010 Compact Stud welding equipment - Through-deck welding for shear connectors and threaded studs.

KOCO ELOTOP Model 6020 through-deck welding shear studs + connectors
The Koco Elotop 6020 stud welder makes the welding process easy when welding stud ranges between 6-25mm. Specifically developed for heavy-duty use on construction sites and continuous operation.

Koike Auto Picle Tube & Pipe Cutting Machine with chain
Motorized Oxy Fuel Pipe Cutter Automatically bevel cuts or straight cuts steel pipe

Koike IK72 solid track
Solid track for Koike IK72 welding tractor

Koike Aronson IK72 with track
Portable, Automatic All-Position cutting machine track

Koike KHC-600D Automatic hole cutter - pipes, tubes, flat plate
Koike KHC-600D Automatic hole cutter - pipes, tubes, flat plate

Kuka KR210 L150-2 2000 Robot 1800GBP
Machine being sold as is for spares or repair - see below for comments from the customer before we purchased it

Lantek Plasma/Duct Software Package
Lantek Expert Cut oxyfuel/plasma is a CAD/CAM specially designed to automate programming of sheet metal cutting machines

Large range of OEM parts for all ESAB welding machines
0449449885, 0341871880 0481995880 0487162880 0486585880 0486368880 0443730880 0481911882

Laser Beacon 6025
Laser Beacon 6025 Transit Interior Visible Deam Unit Rotary Level

Liburdi Dimetrics DMF A1 micro weld head
DMF A1 micro weld head

Liburdi Pulsweld Power Sources
Pulsweld power sources for Gas Tungsten Arc Welding (GTAW) and Plasma Arc Welding (PAW) applications, are the industry's highest quality,

Lincoln Cruiser
The self propelled, modular Cruiser® and Tandem Cruiser® travel carriages, used with the Power Wave® AC/DC 1000® SD power source

Lincoln Flex Feed 74 HT Digital, Heavy Duty Wire Feed
The Flex Feed 74 HT (High Torque) is a heavy duty industrial semiautomatic wire feeder for general, structural fabrication and is designed to be customised for each application.

Lincoln Idealarc AC-1200 welding power source
The AC-1200 is the industry’s leading power source for AC submerged arc welding

Lincoln Idealarc DC-600 MIG Welders
New Separate wire feed 4 roll

Lincoln LINC-CUT S 1530w
The LINC-CUT S 1530w concept relies on fast and simple set up. The new Plug and Play plasma cutting system frame consist in a strong table with water mixed with liquid, makes it possible to capture the dust released during cutting.

Lincoln Precision TIG 275 AC/DC TIG Welder
The Precision TIG® 275 is a versatile shop machine ideal for any type of TIG or Stick welding maintenance application,

Lincoln 1000 ac/dc Powerwave Power Source with control
The Power Wave AC/DC 1000 is the first power source to introduce Waveform Control Technology to submerged arc welding.

Lincoln CV 505 MIG welder with LF34 wire feed unit
Reliable, industrial workhorses with a high duty cycle to support your application the Lincoln CV505 MIG welder will be supplied as a full water cooled package

Lincoln DC 1000/600/655 welder with NA5 controls and wire drive
This Lincoln NA5 sub-arc head with Lincoln DC 1000 amp welding power source were last used on a Beam welding system and are now being sold as units on there own

Lincoln DR 1600/1400 DC Power Source Refurbishment Service rebuilt
We offer a service of repairing and re-building to order

Lincoln Electric DC 1000 Welding Power Source + NA5 + Nilfisk recovery
Lincoln Idealarc DC 1000 amp with NA5 for submerged arc welding (column and booms not for sale)

Lincoln HF unit
Linc LF30 feed unit 4 roll 42 volts

Lincoln Idealarc DC 1000 Power Supply New style and traditional
If your application requires pure welding power combined with multiprocess flexibility, then the DC-1000, with 1300 amps of smooth DC output is for you

Lincoln Idealarc DC 400 Multi Process Welder + Feed Unit
Can be supplied as a MMA stick welding power source or MIG welder with new heavy duty aftermarket wire feed unit with 5m of cables

Lincoln Idealarc DC 600 amp Welding Power Source for Arc Gouging
Operations include semi-automatic manufacturing or fabrication. Your best welding power source selection may be the Lincoln Idealarc DC-600 because of its rugged construction,

Lincoln Idealarc DC 600 Power Source Arc & Stick Welding
Operations include semi-automatic manufacturing or fabrication. Your best welding power source selection may be the Lincoln Idealarc DC-600 because of its rugged construction,

Lincoln LN25 Semi Automatic Wire Feed Unit
For MIG Welding to Suit Most Diesel Welders or DC MMA Electric Power Source

Lincoln LN9 squirt welder manual Sub-Arc Torch
LN9 squirt welder feed unit with hand held Submerged Arc Welding torch and pressurised Flux Tank

Lincoln LT7 Submerged Arc Welding Tractor SAW
Lincoln LT7 subarc tractor can be supplied on its own or with a welding power source.

Lincoln LT7 Track Model K396
Each track section provides 70 in (2 meters) of travel for the LT-7

Lincoln LT7 with DC 600 Welding Power source for SAW
This package consists of a Lincoln DC 600 amp welding power unit, LT7 subarc welding tractor with Laser pointer

Lincoln NA3 Control for submerged arc welding
Ideal for heavy duty fabrication, the SAW NA-3 units feature solid state controls for precise control of welding procedures even to the most exacting requirements

Lincoln NA5 Sub Arc Welding controls SAW
Lincoln NA5 submerged controls

Lincoln Plymovent Statiflex 6000-MS Welding fume extraction
Statiflex 6000-MS or Plymovent is a filtration system for low vacuum, high volume fume extraction systems.

Lincoln Powertec 425s with LF24M ready to plug and play
Lincoln Powertec offers unrivalled choice of step voltage MIG machines. With multiple output levels available across the power source one of the most popular migs sold.

Lincoln S350 Powerwave MIG welder with STT Module
The Power Wave® S350 is a robust Pulse MIG welding machine following the new modular concept.

Lincoln STT II MIG welder with LF30 Feeder UNIT
Tired of spatter, smoke, burn-through, or poor fit-up slowing down productivity?

Lincoln V-300I MMA MIG or DC TIG Power Source wire feed units
Invertec V 300-I is an inverter source of new generation intended for the heaviest duty conditions. This source enables selection of both steep characteristics of constant current (CC) and flat characteristics

Lincoln Vantage 410 CE Diesel Welder Generator - New
Lincoln Vantage 410

Lincoln Vantage 500 Diesel Welder Generator
The Vantage 500 are one of the most compact and powerful engine driven welders/generators in the construction, pipe or rental fleet market today.

Lincoln Welding Equipment and Welders Miscellaneous Items for Sale
We can supply New and Used Lincoln Electric machinery

Load Bank for Calibration of Welders MMA, TIG, MIG & Diesel
The professional way to complete a machine repair

Lockformer
Lockformer

Lorch MicorMIG 400 ControlPro Synergic MIG Welder
The easily adjustable and robust arc of the MicorMIG 400 achieves greatest weld performance. Reliability, robustness, and ease of operation allow integration of the MicorMIG into your production environment cost-efficiently and

Lorch MicorMIG 500 Synergic Control Pro Water Cooled MIG Welder
Get perfect welding results with the MicorMIG 500.

Lorch P4500 MIG MAG welding system with Wire Feed
The P4500 MIG welding system with separate wire feed unit offers energy-efficient top performance around the clock. for MIG MAG, Electrode and TIG

Lorch Thermal wire feed unit
wire feed unit

Lorch V 30 Compact TIG System
Stable arc - at DC and AC, the V 30 is available as a DC and AC/DC version on any performance output level. The V 30 stands out particularly with it's highly stable arc.

Lorch V 30 Gas Cooled TIG Mobile System
The V 30 mobile TIG welder is available in a DC and AC/DC version on any performance output level, it stands out particularly with its highly stable arc.

Lorch V 40 Compact TIG Welding System
The V 40 TIG welder is available as a DC and AC/DC version on any performance output level. The V 40 stands out particularly with it's highly stable arc. The arc shape is optimised for excellent cleaning effect of the aluminium oxide layer and for reduced

Lorch V 50 Compact TIG welding system
The V 50 is available as DC and AC/DC version on any performance output level. The V 50 stands out particularly with it's high stable arc. The arc shape is optimised for excellent cleaning effect the aluminium oxide layer

L-TEC 800 with welding head union carbide
Union Carbide Mobile Sub Arc Welder with Wire Feeder Ucar

L-Tec Heliarc 350 AC/DC TIG Welder, water cooled
Awaiting preparation as just arrived this 350 amp water cooled TIG welder is perfect for aluminium welding

M.C.T. Safety testing kit For Welding Equipment IEC 60974-4
Periodic Inspection and Test of Arc Welding Equipment

Macobe 12 ton Welding Positioner
Power tilt and variable speed with a 12,000kg carrying capacity

Macobe 3000kg Welding Positioner
This 3 ton welding positioner has a table diameter of 1000mm

Magnatech Model 514 orbital tube welder for closed and open heads
Model 514 brings the benefits of true digital technology to the orbital welding customer: unparalleled accuracy, repeatability, and reliability.

Magnatech Pipeliner 609 orbital welder with Fronius MPS4000
Perfect for pipe welding applications such as: Gas, Oil, Water Pipelines, Steam Piping, Chemical, Large Diameter Vessels, Flowlines and Risers, Offshore Platforms – Jackets and and Topsides, Tubular Structures, Pilings

Magnatech Pipemaster 515 With T Head with options for Open heads
Magnatech Pipemaster 515 with open head for pipe-to-pipe and pipe-to-fitting welds for larger diameters open head (Quickclamp) 432 433 can also be used with wire feed and AVC

Mansfeld PA40/50 Hand Torch for Mansfeld Plasma Cutter
For plasma cutter only

Mega Roller Stand, 15.000lbs 4-60" Pipe Dia Capacity, WestWorld
The mega roller (15,000 lbs. / 6,803 kg) is a high capacity pipe roller designed for heavy duty job-site use

Meritus AS Resistance Seam Welding Machine
Meritus Resistance Seam welder for circumferential seam welding

Meritus single sided resistance poke welder 8kva from £900 GBP
Meritus resistance spot welding for single sided spot welder 8kva - for poke welding

Messer MSZ832 Portacut Oxyfuel 220v
The Portacut is a universally applicable, hand guided flame cutting machine for straight, shaped, circular, oblique, X and Y cuts

Messer Griesheim profile motors
Messer Griesheim Motors and gear box

Messer Griesheim Welding Equipment miscellaneous items
In stock Messer spares, parts, consumables for Messer welding and MG plasma cutting machinery

Messer Height Controls and Posts
Messer sensomat PAN

Messer Inverter 400 dc -p tig/plasma welding machine, water cooled
Messer inverter 400 dc -p tig/plasma weler water cooled

MIG·O·MAT plasmaJET 100 with cold wire feed for pipe/tube UNIWELD
UNIWELD Solutions for Manual and Partly Mechanized Microplasma and Plasma Welding Manual welding (hand welding) of stainless steel Microplasma welding of lightweight materials

Migatronic Flex 3000c compact MIG welder with Pulse
Migatronic Flex Digital MIG/MAG Pulse inverter-based compact MIG welding unit

Migatronic LDE 250 amp DC tig and mma stick plant
Wheelbarrow type with under gear for moving around the workshop

Migatronic MTE 440 AC/DC Squarewave TIG Welder
This water cooled system can be used for welding aluminium having both AC and DC

Migatronic pi-mps 400 tig ac/dc water cooled with foot control
Pi are user-friendly welding machines, which meet every need for TIG and MMA welding. High-performance inverter machines for precision welding in mild steel, stainless steel, aluminium and other high-alloy materials.

Migatronic Welding Equipment Miscellaneous Used Items
Various parts and spares for sale

Mighty Midget 3/200 Engine driven Diesel Welder Generator
This World Class design is unique to Westermans making it the smallest and lightest in the global market

Miller 300DX Maxstar DC TIG Welding Machine
Heavy Industrial Applications TIG (GTAW) Welding with Pulsed TIG

Miller Coolpack 1E Water Cooler

Miller Hydracool 270 Water Cooler coolmate
Closed-loop design with radiator reduces coolant temperatures and prevents the system from overheating. Closed-loop design also recirculates the coolant through a fan-cooled heat exchanger.

Miller XMT 350 Power Source CC/CV

Miller 12rc and vs Wire Feeder to Suit Diesel Welder
Voltage-sensing, portable feeders designed to run off of arc voltage from almost any welding power source, provides extreme reliability for construction and fabrication.

Miller 300iP MigMatic Synergic MIG welder, 415V
Miller MigMatic S300iP Synergic Pulsed MIG/MAG System offers full flexibility with a heavy duty drive mechanism capable of consistent and precise wire feeding regardless of your choice of wire

Miller 350 LX Syncrowave AC/DC TIG Welder
Industrial to Heavy Industrial Applications Precision Metal Fabrication, Maintenance and Repair, Light Manufacturing, Heavy Manufacturing, Aerospace,Tube and Pipe,

Miller 350 LX Syncrowave AC/DC TIG Welder new style water cooled
Light Industrial Applications Precision Metal Fabrication Maintenance and Repair Light and Heavy Manufacturing

Miller Aerowave 375 AC/DC TIG Welder, water cooled
Miller Aerowave 375 AC/DC TIG welding machine, a full package with Miller water cooling ready to go.

Miller Airco Syncrowave 300 ACDC TIG welder @ £500 GBP
Miller Syncro welding systems were built to last.

Miller Big Blue 400x cx cc/cv Diesel Welder Generator
Diesel engine driven welder with CAT engines for heavy industrial applications

Miller Big Blue 400X Pro with Arc Reach Diesel Welder
Brand new diesel engine driven welder AC generator

Miller Big Blue 500 Pro - Diesel Engine Driven Welder/ AC Generator
RHC Hand Control 242211020

Miller Deltaweld 602 DC welding power source
This Miller Deltaweld will give superior arc welding performance with MIG welding as do all True Blue products

Miller DeltaWeld 650 Heavy Duty MIG/Subarc Welding power source
This Deltaweld MIG/subarc power source 300GBP

Miller DeltaWeld 651 MIG Welding Machine, heavy duty
This Miller 651 MIG welder is fitted with Miller 4 roll 70 series feed system or S54D wire feed unit

Miller DeltaWeld 852 DC Power Source + S74D Wire Feeder
Deltaweld 852 with Miller D-74D Dual Wire Feed Unit

Miller Dual Feed
miller dual feed spares

Miller Dynasty 300 AC/DC TIG Welder Water Cooled
The Dynasty 300 Series combines the advantages of advanced inverter technology with the built-in features of a high-end TIG power source offering you superior arc performance.

Miller Dynasty 350 AC/DC TIG welder, water cooled package
This used Miller TIG welding package features independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode

Miller Dynasty 700 AC/DC TIG welder, water cooled
The Dynasty is an AC DC TIG welding system with an amp Range of 5 – 700 Amps (we are offering 1 with cooling underneath and one with cooling by the side)

Miller Dynasty 800 AC/DC TIG Power Source Water Cooled Package
Latest technology - this powerful, AC/DC inverter delivers superior arc performance with total AC arc shaping capabilities.

Miller Dynasty DX 200 AC/DC 120–460 VAC, single- or three-phase
When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amperage, initial amperage, initial slope time, final slope time and final amperage control.

Miller Hydramate 1 Water Cooler

Miller Interlas Syncrotig 375p AC/DC TIG welder water cooled
AC DC TIG/GTAW welding machine

Miller Proheat 35 induction pre heating system (PWHT)
POST WELD HEAT TREATMENT (PWHT) with Miller Induction Technology Boosts Productivity, Reduces Hydrogen Cracking in Pipeline Applications

Miller ProHeat 35 Rolling Induction System (PWHT)
POST WELD HEAT TREATMENT (PWHT) with Miller Proheat 35 Rolling Induction System Induction Technology Boosts Productivity, Reduces Hydrogen Cracking in Pipeline Applications

Miller SubArc 1250 AC/DC welding power source
Increase deposition rates up to 50% using the same welding parameters with the Miller SubArc 1250 submerged arc welding power source

Miller Syncrowave 250 AC/DC TIG Package prices from £900 ready to weld
The Syncrowave 250 ACDC GTAW delivers excellent welding performance, control and versatility.

Miller Syncrowave 300 AC/DC TIG welder water cooled
Air or water cooled packages available

Miller Syncrowave 351 AC/DC TIG welder
Miller Syncrowave 351 AC/DC TIG welder - water cooled package

Miller Syncrowave 500 AC/DC TIG welding machine
Thie Miller Electric is a superb heavy duty TIG welding machine, with water cooling and pulse fitted

Miller Welding Equipment Miscellaneous Items for Sale
In stock spares, parts, consumables, manauls, diagrams to repair your Miller Electric welder

Miller XMT 304 cc/cv Multi process MIG Arc welder
Heavy Industrial Applications - multi process for construction, shipbuilding, railroad, truck and trailer manufacturing, fabrication, repairs shops and so much more

Mitre 300 degree welding oven
Small welding rod oven

Morgan & Rushworth MPR2000.6 Powered Pyramid Bending Rolls
Morgan Rushworth Powered Pyramid Rolls

Motorised Slide 300mm for Welding
Variable speed

MPE/Murex 5 Ton Welding Positioner
Table rotation at accurate and constant variable speeds, tilt through 135, precision geared slewing rings for table rotation

Murex Transarc OCVR AC/DC Open Circuit Voltage Reducers
Designed for use when manual metal arc welding up to 400 amps with either a DC (rectifier or generator) or AC (transformer) power source

Murex Welding Equipment Miscellaneous Items for Sale
Murex welding machine parts and spares plus many more

Nederman Filtercart Mobile Fume Extraction
Easy to use mobile filter unit for light to medium welding applications

Nederman Fume Eliminator 860 FE860 Nano 110V UK
The Fume Eliminator 860 is designed to be carried to the working area. Although it can be used with a nozzle, it is specifically developed for on-torch applications - connected directly to the welding torch, it extracts the fume directly at the source.

Nederman N24 Portable fume extraction new and used in stock
Nederman portable fans are simple and powerful ventilation units for service, repairs and other temporary work.

Nederman N29 Fan 2.2Kw 230/400V 3 phase
Looking just for a Nederman fan - sort out your own ducting? Here is an affordable solution.

Nederman Ser 881 Ex Hose Reel with 10m,38mm
ATEX approved vacuum hose reel suitable for cleaning explosive dust.

Nederman 10A 240V Filterbox Fume Extractor - New
Nederman Filterbox 10A Mec 1ph. 230V 50Hz mobile filter with N24 fan for up to 1000 m3/h (600 CFM)

Nederman 2m Arm Original with N16 fans unused 3 in stock
Nederman 2m Arm Original with N16 fans unused

Nederman BenchTop Extraction Arm
Nederman FX2 75 Original is a cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small flexible and easy to use arms are required.

Nederman Electrostatic Welding Fume Extractor Welding Fume Extractor
Sold serviced to order with warranty or sold as is hood has damage but still usable serviced it would be changed

Nederman E-PAK 500 Industrial Fume & Vacuum Unit
The ideal solution for the extraction of sanding and grinding dust and for welding fumes. Also suitable for cleaning of the workplace and the shop floor.

Nederman Extraction Arm - Original
Nederman Extraction Arm - Original 2,3 or 4 meter

Nederman FE840 Fume Eliminator
The Fume Eliminator 840 is designed to be carried to the working area. Connected to an extraction nozzle or a welding torch, the FE unit extracts the fume directly from source.

Nederman Filterbox 12A Mobile Fume Extractor new
Automatic cleaning for medium and heavy duty dust and fume extraction applications

Nederman Filterbox 12A Mobile Fume Extractor used
Automatic cleaning for medium and heavy duty dust and fume extraction applications

Nederman Filterbox 12M Mobile Dust Fume Extractor LAST ONE
Manually cleaned for medium to heavier dust & fume applications. 3m arm fitted LAST ONE AVAILABLE @ 400 VOLTS

Nederman Filterbox fume and dust extraction unit with air cleaning
Nederman Filterbox 663 Mobile fitted with undergear

Nederman FilterBox Twin Arm Extraction Unit
The FilterBox Twin is equipped with two 3m (10ft) extraction arms, and a powerful 2.2kW (3.0 hp) fan for a maximum air flow capacity of 850 m³/h (500 CFM) per extraction arm if both are in use.

Nederman FilterCart Extraction Unit NEW
Easy to use mobile filter unit for light to medium welding applications

Nederman Fume Eliminator FE 24/7 2.5
Mobile unit for continuous welding application and for one or two users.

Nederman Fume Eliminator FE840 working @ £450
We are selling this Nederman fume extraction unit without hose in "as is" condition without warranty. A a great way to eliminate welding fumes at source

Nederman N29 Fan 2.2Kw 220-240/380/420
Nederman N29 Fan 2.2Kw 220-240/380/420

Nederman pre-separator unit
Nederman pre-separator @ 150 GBP will separate liquids and objects to prevent them from going into a stationary piping system.

Nederman Replacement Filter FC-30 Nanofiber for FilterCart Original
Replacement Filter FC-30 Nanofiber for Nederman FilterCart Original+ / W3

Nederman swivel head to suit Nederman arm
Nederman Swivel head to suit Nederman fum extraction arm

Nederman Welding and Grinding Table 2000mm - new
Capture at source with this industrial welding and grinding table for extracting fumes, dust and particles from welding and grinding operations.

Need a new face plate for your welding positioner?
In stock various table tops and face plates up to 96" diameter

Nelson Atlas 2800 -2 Drawn Arc Stud Welder
Drawn Arc capacity 25mm - 100-1000ms with ceramic ring. Thru Deck technology 19mm 3000ms. Short cycle 8mm without ceramic ring up to 100ms

Nelson Nelweld 6000 Drawn Arc Stud Welder Through Deck
Durable, industrial stud welding power source for heavy duty applications

Nelson Nelweld Model 6000 Drawn Arc Stud Welder with New NS20 gun
P-NS 20 BHD High-performance gun for drawn arc welding for shear studs Through deck

NEW Beetle Straight Line Gas Cutting Tractor
Suitable for Straight and Bevel Cuts PRICE @ £600.00 GBP

New CNC control unit

New Hypertherm Powermax 30 Air Manual Plasma Cutting System

New Lincoln Powerwave S500 CE Inverter Power Source
Advance process welding inverter offering outstanding operation and modular configuration

New Manual Chain Pipe Cutting Machine
Complete with 2.4m of chain and 2 sizes of cutting nozzles PRICE @ £565.00 GBP

New Mobile, High Performance Induction Heating System DHI
New DHI-100F mobile, high performance induction heating system

New Water Coolers - Suitable for SPOT, TIG and MIG Welders
water coolers are designed for cooling welding torches. They are characterized by high performance and great duty cycle (100%). It's easy to fill and empty the tank by using drain plug

Nilfish CFM Flux Recovery
CFM Flux recovery Hoper and vacuum unit

Nilfisk CFM 317-60ST or SOL5w Industrial Flux/Vacuum
Nilfisk CFM 317-60ST or SOL5w Industrial Vacuum Cleaner Detachable dust collection

OMP 370PP semi auto cutting Saw
Automatic circular saw for fast cutting of steel sections and solids.

ORBIMAT Orbitalum Dual Orbitwin control unit
Orbimatic Orbitwin 165c dual head switching control unit

ORBIPURGE forming set for tube internal diameters
Used for manual TIG welding and Orbital TIG fusion welding the ORBIPURGE forming set is for tube internal diameters 12 - 110 mm for

Orbital Welding Equipment for Hire
We have a wide range of orbital welding equipment in stock for hire

Orbitalum Orbimat 165 CA orbital welder Choice of closed heads
This used Orbimat 165 CA orbital welding system with a choice of weld-heads is a compact system for high purity jobsites. intel approved for Fab/Clean rooms

Orbitalum Orbimat 165CB Orbital welder
The ORBIMAT CB-series orbital welder includes the well proven ORBIMATIC Auto-programming with easy weld procedure generation which requires input of diameter, wall thickness, material and gas.

Orbitalum Orbimat collets for 115 orbital weld head
63.50, 101.60, and 76.20

Orbitalum ORBIpurge Forming Set
Used for manual TIG welding and Orbital TIG fusion welding the ORBIPURGE forming set is for tube internal diameters 12 - 110 mm for

Orbitalum PS 4.5 Plus Tube Saw 110V - 50/60 Hz
A mobile, powerful and flexible tube cutting machine for use on construction sites.

Orbitalum RPG 4.5 Tube Squaring end weld preparation
Orbitalum RPG 4.5 Tube squaring machine offer specific welding preparations designed for burr free squaring of thin-walled stainless steel tubes

OTC TIG Welding Torch x 4 Units

Oxford Oil cooled 180 and 250 amp welder
Because the oil-cooled welder can tolerate a higher duty cycle, the oil-cooled welder can be used for longer stretches of time,

Oxford/Pickel Oil cooled 300 amp welder
Oil cooled welder with leads

PAMS V Arc monitoring system @ £600
Portable Arc monitoring system V with cables for welding data analysis

PEI Bench Spot Welder PFB Series with Linear Head 15,25 and 35 kva
The PF Bench model is ideal for small component spot/projection welding. The linear action and top and bottom arm/electrode arrangements available in both spot and seam

PEI BSM Resistance Spot Welder, Manual Pedal Operated
PEI column Resistance Spot Welder 15,20,25 and 35KVA

PEI BSP 35kVA Rocker Arm Spot Welder - Energy Saving 3 Phase Inverter
BSP 136 Inverter rocker arm spot welder with PX1700PRO MFDC controls uses a lot less power then a standard AC spot welder, works from 32 amp socket, 3-phases

PEI BSP Resistance Spot Welder with Pneumatic Control
Resistance spot welder made by PEI, model BSP with pneumatic control

PEI Butt Welder for Joining Steel Rod and Bar End to End
An Air Operated BUTT WELDER for rapid production.

PEI Carpoint 11 RF PX1700 scissor and single sided spot/Poke/Seam
Powerful transformer sresistance welder can be used as a single sided poke gun at 11kva but 400 volts only

PEI Carpoint Automotive Portable Spot Gun Welding System
Powerful transformer mounted on wheeled trolley with built-in watercooler

Pei CH 129 Chiller, 2.9kW Cooling capacity
Details to be confirmed on PDF

PEI DR Portable Twin Spot Welder
Portable spot welder for production, industrial multi-spot welding made by PEI, model DR

Pei Europei Europei Industrial Portable Spot Gun Welding System
Powerful transformer mounted on wheeled trolley with built-in watercooler

Pei Fastspotter 5kVA 110/120V 60Hz w/ PX1700Eco Control

PEI GS 30 - GS 40 Twin Spot welding machine
Two models are available of the PEI GS Twin single sided spot welding either GS 30kVA or GS 40kVA

PEI PB 116 15 KVA Spot welder water cooled
PEI PB 116 15 KVA Spot welder Modern efficient design rocker arm type spot welders suitable for a wide range of applications from those found in small workshops to high production in large factories.

PEI PB Resistance Spot Welder with Rocker Arm
Resistance spot welders with rocker arm made by PEI, model PB

PEI PBP 35kva Spot Welder with PX 1500 Controls
Modern efficient design rocker arm type spot welders suitable for a wide range of applications from those found in small workshops to high production in large factories.

PEI PBP Resistance Spot Welder with Rocker Arm
Resistance spot welders with rocker arm made by PEI, model PBP

PEI PF Inverter Industrial Spot Welder - Energy Saving
Industrial spot welder with linear action for spot and projection welding, cross wire work with bar holders and weld nuts up to M10

PEI PF Spot and Projection Resistance Welding Machines
Linear action machines suitable for spot, resistance and projection welding, cross wire work with bar holders etc. Ideal for weld nuts up to M10

PEI PFB 136/138 Resistance Energy saving 3 phase inverter Bench type
PFB 136/138 resistance spot welder Inverter type with PX1700PRO MFDC Energy saving 32 amps 3 phase

PEI PFB-R Bench Mounted Resistance Seam Welder
A new bench model resistance seam welding machine conceived, designed and built originally for a particular client but suitable for general use

PEI PFK Spot and Projection MFDC Inverter Energy saving 3Phase
Three-phase (MFDC) power supply Constant current regulation welders with HP400/HP1000 Inverter Source

PEI PFK Spot and Projection Welding Machine single phase 80 to 150kva
Single-phase (AC) or three-phase (MFDC) power supply Constant current regulation: AC welders only with CS-NET welding control; MFDC welders only with HP1000 Inverter

PEI PFP Resistance Pedestal Spot/Projection Welder
Linear action projection welders with PX1700 digital control with 9 programmes

PEI PFR Resistance Welder for Seam Welding
Resistance welder for circumferential seam welding made by PEI, model PFR

PEI PN Suspended Portable Spot Welder - Scissor Gun
Portable, suspended spot welders with scissor type gun, made by PEI, model PN

PEI PN25C Suspended Portable Spot Welder - "C" Gun
Portable, suspended spot welder with "C" type gun, made by PEI, model PN25C

PEI Portable Hand Held, Light Duty Spot Welder
Sturdy construction for long reliable life Model M230F/400F has time and current control with ‘FUZZY LOGIC’ intelligence.

PEI PX1700ECO AC resistance welding control in cabinet 90/ 160 AMP
PX1700ECO welding control, with SCR 90A OR 160A in cabinet, water-cooled

PEI PX1700ECO AC resistance welding control unboxed
PX1700ECO AC Unboxed controls only

PEI PX1700PRO AC resistance welding control unboxed
Same functions as the PX1700ECO, in addition: 100 welding programs storable

Pei PX1700PRO MFDC Control unboxed

Pema ESAB 1000kg Welding Positioner
The Pema welding positioner has adjustable height from 700mm min to 1000mm max

PG2W Water Cooled Poke Gun with Cable
The PG2W is a fully watercooled version of the PG2, allowing use under higher duty cycle conditions.

PG5 Poke Welding pliers gun,
The PG5 is an ergonomically designed pliers gun, for use where access to thin gauge sheets (up to 0.5mm) is required.

Pipe Cutting Machine all requiring work
Orbitalum GF6 AND George Fischer For spares or repair

Pipe Roller Conveyors for feeding long pipes down a line, WestWorld
Pipe conveyor 2 roller type for feeding long pipes down a line, whist working on site or moving pipes around a fabrication shop

Pipe Spool Rotator, Capacity 5000kg, New West
A spool rotator is widely used for elbow welding in long pipe runs

Plastic Pipe Welding Single Unit Electronically
Socket Welding Unit for use with Heating spigots and Heating Sockets

Polysoude Astro Arc PC 350/300 Orbital Welding Power Source
A small selection of orbital open welding heads in stock - Stock number 13225 With more photos

Polysoude Astro-arc closed orbital welding heads
875T Closed head and k1500 Can combine with polysoude orbital powered source if required

Polysoude Astro-arc closed orbital welding heads
This "as new" Astro-arc K2000T closed weld head for orbital welding is for sale

Polysoude Autotig 140P Orbital Inverter Tig welder
This Polysoude GTAW orbital welding system is robust, compact and light.

Polysoude Autotig 250 Orbital welder @ £500
High precision automatic Polyousde Messer orbital welding unit for TIG welding with pulsed current

Polysoude Autotig 254 Orbital Welder & open head up to 28mm or 80mm
With open head and wire feed

Polysoude Autotig 350pc Orbital welding Power Source
The Polysoude PC is a full function orbital or mechanised welding and cladding system. High precision for prefectly controlled heat and input and welding penetration.

Polysoude cold wire feed unit orbital selection of models
Polysoude cold wire feed unit Full compatibility with any series of power sources and welding heads for both hot and cold wire

Polysoude collets 104mm to suit 115 Orbital weld head
Polysoude orbital weld head collets 104mm

Polysoude Orbital Remote
Polysoude remote to suit orbital welder

Polysoude Orbital TIG GTAW welder, model PS204 and MU1V head
Complete with Open head MU 1V open weld head and water cooling system

Polysoude Orbital Welding Heads
mu 42-70 mu-108 and others

Polysoude P3 UHP High Purity Orbital Tube welding system
P3 UHP smart orbital welding power source made for demanding Ultra High Purity industries

Polysoude P4 orbital welder - choice of closed weld heads
Closed Welding head TIG / GTAW all position orbital welding of tubes, fittings and accessories. O.D. from 1,6 mm to 115mm subject to head size

Polysoude P4 P6 Orbital welding remote control pendant
Polysoude P4 and P6 Remote control pendant for orbital welding. 4 axis

Polysoude P4-3 Smart Orbital Welding Station MW65-3 or MW115-3
The new portable Smart Welding Station P4-3 for orbital tube welding is compatible with all Polysoude welding heads with or without filler metal

Polysoude Printed Circuit Boards for PC300/350
new pcb boards to suit polysoude pc 300 and 350 power source

Polysoude PS 164 Orbital Welding Power Source
This GTAW orbital package is set up to carry out tube to tube welding from 6mm to 115mm

Poron Acron MB7 Battery Tab Welder
Battery tab welder made by Poron Acron, model MB7

Portable Welding Screens
Easy to assembly, sturdy, mobile welding frames comes with PVC welding curtain, CE approved to BS EN ISO 25980.

Portalift Welding Head and Tail stock adjustable height, Westworld
Powered elevating Head and Tailstock Welding Positioners provide maximum efficiency and throughput

PPE 900mm (36 inch) Pipe Profile Cutting Machine or Welding
Suitable for pipe fabricators who wish to cut 90 degree saddles and mitres

PPE Through hole welding positioner with dual 3 jaw chuck 3000kg
Made by British Pipe Positioning Equipment (PPE) All gas cutting equipment removed and used as a welding positioner for pipes upto 36" (900mm) @ 3000kg

Pre Heat Power Source Pre-heating and post weld heat treatment
POST WELD HEAT TREATMENT (PWHT) Portable heat treatment unit designed for powering and controlling standard 60V, 48V or 30V heating elements dependent up on the operator selected maximum output voltage setting.

Pre Heat Treatment Inverter Power Sources PWHT For Preheat Made in EU
POST WELD HEAT TREATMENT (PWHT) A portable, powerful resistance heating unit, small, lightweight and efficient from 1 single unit to a bank of units giving additional heating pads Compared to flame or resistance heating

ProArc 1000kg Welding Rotators
For vessel, tank and pipe rotation during welding. These have a 1000kg turning capacity using the drive & Idler unit

ProArc 100kg Positioner (Not made in China)
This welding positioiner is ideal for use in production lines, welding pipe work ie lighting towers and lamp posts, hand rails and a variety of small tubular applications.

ProArc 200kg Welding Positioners, Bench Type
Precision speed controls that are suitable for automation welding application. This Machine incorporates a rotating table with forward/stop/reverse functions

ProArc 50kg Positioner with CB-101D Digital Control Box
High frequency protected.

ProArc 684mm External Longitudinal Seam Welder
A plug and play, ProArc 600mm longitudinal welding system for straight-line welding along the seam of cylindrical, conical and rectangular workpieces.

ProArc Athlete CNC Plasma Cutting Machine
High precision, compact, dual drive CNC plasma profile cutting machine

ProArc Automatic Longitudinal Seam Welder LS-12, 1296mm Welding Length
Longitudinal seam welding machine for welding lengths up to 1296mm.

ProArc Automatic Longitudinal Seam Welder LS-15, 1596mm Welding Length
Longitudinal seam welding machine for welding lengths up to 1,596mm

ProArc Automatic Longitudinal Seam Welder LS-18, 1900mm Welding Length
Longitudinal seam welding machine for welding lengths up to 1900mm.

ProArc Automatic Welding Lathe with 1000kg Pipe Rotators
These automatic welding systems are a combination lathe welding with turning rolls in a bench design.

Proarc AVC Control System add on unit
Arc Voltage Control System with as choice of slides

ProArc CB001 Control Box
ProArc CB001 Control Box to suit positioner PT-101 / PT-102

ProArc Circumferential Welding Lathe System Full Auto Station
Perfect for small tube and pipework and tube to flange welding this automatic welding lathe system is perfect for circumferential welds

ProArc CNC Hypertherm XPR 300 Plasma & Gas Cutter
ProArc CNC plasma and gas cutting system - Choice of Hypertherm Powermax 125 or Hypertherm XPR 300 plasma source

Proarc control to suit welding postioner
CB101 variable speed Controller

ProArc HTS Powered Head and Tail Stocks
Capacities ranging from 500 to 20,000kg

ProArc L Type Fully Automatic Lathe Welding System
A fully automated but simple to use solution for your circumferential welding applications Option for Arc Voltage Control System

Proarc L Type lathe bed for plastic welding of 600mm plus pipes
For plastic welding of pipes, this modular lathe is a cost effective way of building a bigger lathe bed

ProArc L Type, 100kg Digital Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

ProArc L Type, 200kg Digital Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

ProArc Lathe welder PCW Precision Circumferential Welder
ProArc PCW Precision lathe Circumferential Welder provide all of the features necessary to position and rotate parts for circumferential welding.

ProArc Longitudinal Seam Welder LS-18, 1900mm plasma/tig
This is pre-used LS-18 Longitudinal Seam Welder with Thermal Arc (Lorch) 400SP Powermaster Plasma welder & WC100B Plasma console unit and remote

ProArc LS Lift Type Longitudinal Seam Welder
This system is a longitudinal seam welding type equipment, that provides automatic welding process for flat-plate or round tank/vessel seam welding.

ProArc Magicut CNC Plasma and Gas Cutting Machine
Compact CNC plasma or flame cutting machine. A robust build for 100% duty cycle

ProArc Master Plasma and Gas CNC Cutting Machine
Looking for a medium to heavy duty CNC plasma cutting table?

ProArc MIG/MAG automate Weaving Oscillator
The ProArc WO-15 oscillator is perfect for automated arc manipulation by use of mechanical arc oscillation. It's suitable for MIG/MAG automate processes in heavy fabrication industries

ProArc MP Compact Manipulator/Column and Boom
ProArc MP-1212 is designed specifically for TIG & MIG circumferential welding application. Combining with ProArc welding turntables or rollers, you can develop your own welding automation system and maximize your work efficiency.

Proarc PG 150 3-Jaw Chuck, 4-150mm
ProArc PG 3 Jaw Chuck - PG-150, OD 4-150mm

ProArc PG Gripper chuck PG-300, OD 4-300mm
ProArc PG 300 3 Jaw Chuck 4-300mm

ProArc PG Gripper chuck PG-500 OD 4-500 mm
Inside Clamp Range (mm): 55~150

ProArc PG Gripper chuck PG-750 OD 15-750mm
ProArc PT-750 welding positioner, OD 15-750mm.

ProArc PG-095L 3 Jaw Chuck OD: 3-95mm
ProArc PG-095L 3 Jaw Chuck OD: 3-95mm

ProArc Pipe Welding System with Column and Boom Manipulator
A circumferential welding system designed for the welding of nozzles and saddles into vessels.

ProArc PT-1000 1000kg Welding Positioner
Compact 1000kg capacity conventional welding positioner

ProArc PT-150P Cobot Application
Proarc PT-150P Cobot application

ProArc PT-2000 Conventional Welding Positioner, 2000kg Capacity
2000kg capacity conventional welding positioner

ProArc PT-2000H 3 Axis Hydraulic Positioner
New ProArc 2000kg 3 axis hydraulic welding positioner

ProArc PT-200P-100 with 100mm dia through-hole & CB-500 Controller
Loading 200kg/130kg

Proarc PT-200s ServoArc positioner with CB-500 controller
Proarc PT-200s ServoArc positioner with HMI and high speed movement film clip shows the PT200kg

ProArc PT-3000 Conventional Welding Positioner, 3000kg Capacity
3000kg capacity conventional welding positioner

ProArc PT-3000H 3 Axis Hydraulic Positioner
New ProArc 3000kg 3 axis hydraulic welding positioner

ProArc PT-500 500kg Welding Positioner
Compact 500kg capacity conventional welding positioner

ProArc PT-5000 Conventional Welding Positioner, 5000kg Capacity
5000kg capacity conventional welding positioner

ProArc PW-25 Pipe and saddle welder - join pipes at a vertical angle
This Proarc circle welder is designed for the welding of nozzles into vessels and specially for joining pipes at a vertical angle

ProArc R Type Fully Automatic Lathe Welding System
A fully automated but simple to use solution for your circumferential welding applications with ProArc Pneumatic Torch Actuator/lift Option for Arc Voltage Control System

ProArc R Type with 100kg Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

ProArc R Type, 200kg Digital Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

ProArc S Type Fully Automatic Lathe Welding System
A fully automated but simple to use solution for your circumferential welding applications. Option for Arc Voltage Control System

ProArc S Type with 100kg Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

ProArc S Type, 200kg Digital Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

Proarc seam welder with side beam for circumferential welding
LS-15 Longitudinal seamer, 1500 mm

ProArc ST-150 Welding Seam tracker
The ProArc ST-150 is a efficient mechanized welding seam tracker that can be easily integrated into welding equipment.

ProArc SV-260 Safety Viewer with No 10 glass

ProArc T-Cut CNC Tube Cutting Machine
T-Cut plasma tube cutting system

ProArc TR0100 Welding Rotators - used set
For vessel, tank and pipe rotation during welding. These have a 1000kg turning capacity using the drive & Idler unit A set consists of 1 Powered unit and 1 Idler unit

ProArc TR-0104 Digital Bench Welding Rotators, 1 Drive & 1 Idler
For vessel, tank and pipe rotation during welding. These have a 1000kg turning capacity using the drive & Idler unit

ProArc TR-1003B Bolt Type Welding Rotators
ProArc TR-1003B Bolt Type Welding Rotators

ProArc TR-3500B Bolt Type Welding Rotators
Turning capacity 3500kg

ProArc TR-3504 3500kg Conventional Welding Rotators Not made in China
Turning capacity 3500kg

ProArc TR-6000B 6000kg Conventional Welding Rotators Not Made In China
Turning Capacity 6000kg 1 powered 1 idler

ProArc U Type Fully Automatic Lathe Welding System with HMI Control
A fully automated but simple to use solution for your circumferential welding applications. Option for Arc Voltage Control System

ProArc U Type with 100kg Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

ProArc U Type, 200kg Digital Positioner Automatic Lathe Welding System
Create your own automatic, circumferential welding system easily with a large variety of system components

Profile Cutting Rails to suit plasma cutting machine
Various lengths and heights

Protecto Autoclenz Portable Fume Extractor with Self Cleaning Filter
Mobile fume filter incorporating a separator, durable large surface area filter cartridge, filter monitor, post-cleaning function and hour meter

ProtectoAir Mobile Fume Extraction System
The ProtectoAir welding fume extractor is a BGIA approved mobile fume filter type UPF-BIA class W3 incorporating a separator.

ProtectoArm Long Reach Wall Mounting Fume Extraction Kits
Long reach suction arms available with a 5-8m self supporting articulated arm

ProtectoArm Wall Mounting Fume Extraction Kits
The ProtectoArm range of 150mm diameter extraction arms are available in a variety of different lengths.

PROTECTOCUBE Extractor 2H 3KW UNIT 415V
The ProtectoCube product line is a filter unit equipped with filter cartridges applicable for nearly every task in the area of fume and dust filtration

ProtectoFan Fume Extraction Fans
Suitable for connection to suction arms, in order to evacuate fumes and particles from the extraction point

Protectoscan EDI Unit for monitoring fume and dust exposure
The Protectoscan is an Environmental Detection Instrument that provides intelligent, data-driven protection and interaction (optional) in the industrial workplace.

ProtectoSmart Industrial Vacuum Extraction System
1 ph. 230V input

ProtectoVac Max Portable Fume Extraction Unit
The ProtectoVac MAX is a high quality, low cost, highly portable extraction unit.

ProtectoXtra Mobile Cartridge Fume Extraction with manual cleaning
ProtectoXtra is a mobile fume extraction system for filtration of particulate fumes, dusts and some gases

ProtectoXtract High Efficiency Welding fume Extraction
In stock and ready for despatch - these are very popular welding fume extractors.

ProtectoXtract Wall Mounted Filter Fume Extraction System
ProtectoXtract wall filter is an FDA approved wall mounted welding fume extraction system for filtration of particulate fumes, dusts and some gases

PW PG3 Poke Welding Gun
The PG3, (shown here with a roll spot wheel) takes a 13mm tapered electrode, ideal for medium duty work on heavier gauges than the PG2.

PW PG3W Water Cooled Poke Welding Hand Tool with Cable and Hose.
The PG3W is a fully watercooled version of the PG3, allowing use under higher duty cycle conditions.

PW Portable Welders Scissor Type Suspended Heavy Duty Spot Welder
PMGS 54 50 KVA suspended heavy duty resistance Spot Welder with water cooled arms

Quick Release Chucks & Grippers for Welding Positioners
3 jaw chuck - centering adaptor included

RED-D-ARC Welding Automation RDA-FHVP5 5000kg Welding Positioner.
RED-D-ARC Welding Automation Model RDA-FHVP5 5000kg Capacity Welding Positioner.

Resistance spot welding Arms & Electrodes - many makes
PEI Sureweld, Tecna, British Federal, Meritus, PW, Sciaky, SIP, Telwin UREWELD TECNA BRITISH FEDERAL MERITUS PW SCIAKY SIP TELWIN

Ridgid 11R BSPT Enclosed Manual Ratchet Threader Set. OFFERS
Ridgid Model 11-R 3/8" - 2" BSPT Enclosed Manual Ratchet Threader Set in Metal Case - 13078

Rothenberger plastic welder P250B
Butt fusion machine – field machine for welding of pipes PE PP and PVDF Ø90 to Ø250 mm. SDR 41 – 7,4

SAF Digiwave 400 MIG Welder
DIGIWAVE - A user-friendly high level performance DIGIWAVE makes the ideal partner for all manual, automatic and robotic welding applications.

SAF Minisaf 02 Portable All-Terrain Carriage
Mini SAF carriages bring you the quality of automatic MIG welding thanks to their faultless stability

Saf Novitome CT 1030 CNC and magic eye plasma gas profile
Saf Novitome combined metal cutting machine with CNC and Magic eye scanner set up for plasma and/or gas cutting

SAF/lincoln Nertinox Plasma TIG welding system, 2 models
SAF Air Liquide automatic Plasma welding has been used in the boiler making industry and many others for decades

Sciaky Circumferential resistance seam welder last used for ducting
Sciaky Circumferential reistance seam welder 50 KVA with lower drive

Sell MIG, MAG, GMAW, MMA Welding Kit to us Today
We buy all makes but pay more for ESAB, Kemppi, Fronius, Polysoude, Miller, Lincoln, SAF and Murex makes

Sideros Engineering Ecoline ECO 4 HC/S Extraction System
Sideros Engineering Ecoline ECO 4 HC/S Extraction System

SifGun Evolution Fume Extraction MIG Torch
Mig and FCAW welding torch with integrated extraction at the nozzle

SifVac Industrial High Vacuum Extraction System
Ideal modular unit that can be modified or purpose - built for specific applications to support the extraction of fumes and dust directly at the source

SMEI PT0 Butt Welder for Wire Welding
Butt welder for wire welding made by SMEI in Italy, model PT0

Spares for Westinghouse HL90, HL83 and HL7 Magic Eye Units
Please state the spares required to enable us to give a price

Subarc Flux Heater/recovery

Subarc Flux heat unit
Flux heat to suit lincoln NA3 or NA5

Surecool 5B Water Cooler
Cooling capacity 5800 watts

Surecool 9C Water Cooler
Cooling capacity 9000watts

Swagelok 5H Orbital Weld Head
Series 5 Weld Head is for outside weld joint diameters from 1/8 to 5/8 in. and 3 to 17.3 mm

Swagelok M100 power supply for spares only - software problem
Spares or repair Swagelok M100 orbital TIG welding power source with a software issue

Swagelok M200 orbital welder with weld head 5 or 20 In Stock
Swagelok M200 orbital GTAW power source for reliable and consistent TIG welding - simple and user friendly setup and operation

Swagelok Orbital side fixture plates
Swagelok orbital welding side fixture plates

Swagelok Series 8 Fixture SWS-8MFA,SWS-4MFB-4
SWS-8MFA-8MM, SWS-4MFB-4MM 8 Fixture

Swagelok SWS M100-1 Power Source Orbital Welder with 5H Closed Head
Swagelok SWS M100-1 Power Source Orbital Welder with 5H Closed Head and ser 5 Fixture Block as shown

SWP Force MIG welding torch 500amps
This torch has a Fronius feed and plug fitted

T Slotted Welding Table 710 x 710 x 760mm

TAG E-Z Fab Pipe Cold Cutting and Bevelling machine
The E-Z FAB is a revolutionary new cutting and bevelling system for pipes ranging from 2" to 16" o/d (60 mm to 420 mm)

TAG PREP 16 Bevelling Machine, Range 2.8 - 16" (72 - 400mm)
TAG Pipe bevelling machines to suit most sizes from 1/2 to 24"

TAG PREP 2 bevelling machine range 09-15" (23-42mm)
TAG Pipe bevelling machines to suit most sizes from 1/2 to 24"

TAG PREP 24 bevelling machine range 6.9 - 23.6" (175 - 600mm)
TAG Pipe bevelling machines to suit most sizes from 1/2 to 24"

TAG PREP 3 bevelling machine range 1 - 3" to (28 - 76mm)
TAG Pipe bevelling machines to suit most sizes from 1/2 to 24"

TAG PREP 4 bevelling machine range 1 - 4" (23 - 112mm)
TAG Pipe bevelling machines to suit most sizes from 1/2 to 24"

TAG PREP 8 Beveler Electric 110v Range 2-8" (50-211mm) as new
Functions for this pipe bevelling machine: External bevelling / internal bevelling / elbow and fittings bevelling / facing / counter-boring / weld removal / J-prepping / compound bevels

TAG PREP 8 bevelling machine range 2 - 8" (50 - 211mm)
TAG Pipe bevelling machines to suit most sizes from 1/2 to 24"

TAG Split frame clamshell cold cutting and bevelling 1" to 48"
RANGE: 1" to 48" o/d (25 - 1,220mm) Larger sizes and customised machines available upon request.

TAG Split frame clamshell cold cutting and bevelling 48 to 120
RANGE: 48" to 120" o/d (1,220 - 3,050mm) Larger sizes and customised machines available upon request.

Taylor CDM10 Capacitor Discharge Stud Welding Machine
CDM CAPACITOR DISCHARGE STUD WELDING MACHINE A Compact, portable Capacitor Discharge stud welder designed to weld up to 10mm diameter studs.

Taylor CDM8 Capacitor Discharge Stud Welding Machine - New
Compact and portable Capacitor Discharge stud welding equipment designed to weld up to 8mm dia. CD studs

Taylor CDM9 Capacitor Discharge Stud Welding Machine
Compact and portable Capacitor Discharge stud welding equipment designed to weld up to 8mm dia. CD studs

Taylor DA 1600 Drawn Arc Stud Welder
Drawn Arc system complete with Hand Gun Welding

Taylor Drawn Arc Stud Welder DA 2400 shear studs
Robust manoeuvrable Drawn Arc equipment designed to weld large studs up to 25mm in diameter.

Taylor i12 Inverter Stud Welding with Handtool
Compact, portable drawn arc inverter stud welder designed to weld up to 12mm reduced base studs.

Taylor Stud Welding Machine System 1200
Taylor Stud Welding Machine System 1200

Taylor Stud Welding System 800 DA Stud Welder with hand tool
Drawn Arc Welding Stud Range: 3mm – 10.8mm or 12mm reduced base studs

Tec-Arc 500i AC/DC Calibrator
Tec-Arc 500i Calibrator

Tec-Arc VRD 300i Voltage Reduction Device
VRD300i- voltage reduction device for MMA welding The VRD300i is an open circuit voltage reducer, designed for use with MMA welding machines to provide a low voltage of less than 24 volts DC at the electrode holder when welding is not in progress.

Tec-Arc 2000 AVC arc voltage controller TIG & plasma welding cutting
2000 AVC (arc voltage controller) for automatic TIG & plasma welding and plasma cutting Industrial quality British made automatic arc length

Tec-Arc Hot Wire TIG welding power source
HOT wire TIG welding power source. The PS100 is a 100A power source designed for HOT wire TIG & plasma welding applications.

Tec-Arc TC1000 Water cooler on portal trolley
This water cooler with under gear, makes the TecArc TC1000 the ideal unit for water cooling almost all standard welding applications

Tec-Arc TIG hotwire feed 100

Tecna 12kva Pneumatic Spot welder with water cooler
Tecna spot welder 12 kva Air Operated and water cooled

Tecna Balancer suit suspended spot welders
Range of spring counter balances to suit small to large please state model required or weight

Tecna Portable Auto Body Spot Welder
Portable auto body spot welder made by Tecna, model 8095 with TE95 controls

Telemecanique yellow pendant 6 way with optional variable speed pot
Pendant control 6 way

Thermal Arc HE100A Water Cooler

Thermal Arc Lorch 400SP with feed breaking for spares @ £400 GBP
Thermal Arc Lorch PowerMaster Plus 400SP with feed units - Breaking for spares

Thermal Arc Ultima 150 Plasma Welder Machine or Hand option
The Ultima 150 Plasma Arc Welding system has many advantages over traditional automated TIG welding including: increased productivity, consistent arc starting, improved process control and reduced electrical emission interference.

Thermal Dynamics A40i Plasma Cutting System
The new A-Series is the easiest solution to install on any cutting machine.

Thermal Dynamics and Thermal Arc Plasma Cutters Miscellaneous Items for Sale
Spares and consumables for sale

Thermal Dynamics Pak Master 50 BUY 2 GET ONE FREE 600GBP
Thermal Pak master 50 plasma cutter with hand torch

Thermocouple Attachment Unit, GTW-V50
The GTW-V50 is a portable, rechargeable battery operated, automatic, thermocouple attachment unit which uses the capacitance-discharge method for the attachment of thermocouple wire to a work piece,

Thinking of selling your machine?
Then what you want is a really good price and space in your workshop Send us the make, model, year of the welder and a photo so we can make a fast decision. We handle the all the shipping. Instant Payment

Tig Cold Wire Feed Auto with hot wire
This unit is designed as an easy add on for all TIG welding machines & torches for hand welding or automatic welding of all metals. Ideal for many applications such as metal cladding, pipework,

TIG Foot Control
Various TIG GTAW foot control units for sale to suit Lincoln, Kemppi, Proarc, EWM, Miller and ESAB to name just a few

Traron FS 1000-4020 Battery tab welder bench mounted manual tab welder
Traron FS 10-4020 Battery tab welder bench mounted manual tab welder

Traron FS 1200-5 1307 Battery tab welder bench mounted
TRARON Poron series welders for battery tab welding manual and automatic systems

Tri-Tool 206B bevelmaster
Model 206B BEVELMASTER Portable Beveling/Machining System

Tri-Tool 212B Bevelmaster Portable Bevelling System
Model 212B BEVELMASTER™ Mid-Range Portable Beveling System

Tri-Tool 212B-MB Elbow mandrels
Model 212B BEVELMASTER flange facing and compound bevelling capabilities.

Tri-Tool bevelling weld prep. Models 212B And 203B make a offer
The portable ID mounted models 212B And 203B beveling weld end preparation tools

Tri-Tool Orbital bevelling and facing tools - Protem
Huge choice of Tri tool 301 Protem SE 60 Tri tool 212b Tri tool 206 Tri tool 301 Tri tool 572e - weld prep pipe and tube

Tube to Sheet Expanding Centering Device
tube to sheet expanding centering device

Union Jubilee Double Pedestal Grinder
An essential part of any workshop, the double ended grinding machine is used for drill bit sharpening and other fine material removal processes

Unknown Bison Double Pedestal Grinder
An essential part of any workshop, the double ended grinding machine is used for drill bit sharpening and other fine material removal processes

VBC Automated Mini Seam Welding System
Longitudinal welding system with 3 axis torch adjusters, IE160 automatic pulse welder, pendant and frame

VBC Instrument Engineering Welding Lathe
VBC Welding Lathe for circumferential welding

VBC Model Welding Positioner with overhead support and hole thru
Model O (Oxford) auto turntable with a 609mm faceplate

VBC Multiweld Controller Instrument Engineering
VBC Multiweld controller P5503 Liburdi

VBC wIre feed controls
VBC Instrument engineering cold wire feed unit pulsed s2 EP O67 Controls only feed drive missing

Viper 2000 add on HF Unit
The Viper 2000 is a versatile and lightweight machine. This unique compact TIG control unit independently controls the welding current of any DC power source without the need for auxilliary or control cables. It operates from the open circuit

Voortman V550-A CNC Auto punching shearing machine Flat Angle
The Voortman V550-A is a CNC Punching & shearing system with flat bar shear and angle shear

VRD300i- Voltage Reduction Device for MMA Welding
VRD300i- voltage reduction device for MMA welding The VRD300i is an open circuit voltage reducer, designed for use with MMA welding machines to provide a low voltage of less than 24 volts DC at the electrode holder when welding is not in progress.

W-2 Hollow Welding Turntable Vertical Load 150kg
Model -2 Manual Hollow Turntable with 153 mm thru bore as standard with or without chuck

Warco DIY Drill
More details to follow

Water cooler for MIG or TIG welding systems, 110v and 220v
Used water coolers various makes all for mig or tig

Weld engineering flux heater hopper and recovery
Weld Engineering Co HFH-1 Flux Heater with Hopper & Recovery

Weldability Pipe Chain Clamps
A clamp with the strength and ability to align and lightly reform pipes with a lightweight design and construction for ease of use

Welding Positioner capacity 8000kg AS IS condition @ £3000GBP
This 8000kg welding positioner has a problem with drive is missing for rotation

Welding Rod Quivers ovens
single phase

Welding Rotators Model PR3 Pipe Rollers, WestWorld from £3000
Weight Capacity per set 3,000 kgs

Westinghouse HL-90 COORDINATE DRIVE motors Pittman new and used
HL90 scanner and pitt man motors to suit small magic eye bed G07 drive is a 50:1

Westinghouse HL8 and HL83 Control Spares
Direction switches, pots, photo cells and door graphics

Wicon / Britannia pedestal with or without pendant control
Wicon / Britannia pedestal with or without pendant control

X & Y Motorised Slides for Use with Seam Welding
Jetline and others brands from £1000 GBP