Protect your welder – he needs it

How important is the Health of your Welders?

I found two linked articles today.  Please read these and together we can protect our welders around the world

  1. Global Welding Fume Extraction equipment market is expected to reach USD 5.9 billion by 2025
  2. The International Agency for Research on Cancer (IARC) has updated its classification for welding fumes and UV radiation

Industrial fume extractor small

The mandatory health and safety workplace regulations compliance which are globally applicable has been a major factor driving market growth. In addition, increasing demand from various end-use industries such as construction, automotive, shipbuilding and others for a clean environment to increase the operators’ productivity, is further fueling the market growth.

This is great news not just for the manufacturers or business like ours that supply fume extractors to the work place but for the millions of welders around the world.

Fume extraction equipment is used to capture and remove, smoke and welding fume particulates produced during the welding process. Different welding methods such as arc, laser beam, resistance, and oxy-fuel produce particulate fumes containing toxic substances including chromium, manganese, zinc, nickel and others. The prolonged exposure to these toxic fumes results in different health issues such as chronic lung problems, Parkinson’s disease, cancer of the larynx and others. The rising awareness among the welding operators about various health concerns is anticipated to boost the market.

Want more on the report? Read here


The International Agency for Research on Cancer (IARC) has updated its classification for welding fumes and UV radiation from welding to Group 1 carcinogens, the agency’s designation for agents that carry sufficient evidence of carcinogenicity in humans.

A previous IARC assessment done in 1989 classified welding fumes and UV exposure in Group B as “possibly carcinogenic to humans.”

In March, a group of 17 scientists from 10 countries met to reevaluate the risk welding fume exposure presents to people based on new evidence that has since accumulated from observational and experimental studies.

In a report published in May’s The Lancet Oncology, researchers found that arc welding generates UV radiation: a risk factor for various cancers of the eye and eye burns.

Welding fumes were also found to increase the risk of lung cancer, and to some degree kidney cancer and chronic inflammation. Researchers also noted that solvents used for cleaning metal in tandem with welding, such as trichloroethylene, showed an increased risk for kidney cancer.

OSHA’s suggestions to reduce exposure to welding fumes include:

  • Welding surfaces should be cleaned of any coating that could potentially create toxic exposure, such as solvent residue and paint.
  • Workers should position themselves to avoid breathing welding fume and gases. For example, workers should stay up wind when welding in open or outdoor environments. General ventilation, the natural or forced movement of fresh air, can reduce fume and gas levels in the work area. Welding outdoors or in open work spaces does not guarantee adequate ventilation. In work areas without ventilation and exhaust systems, welders should use natural drafts along with proper positioning to keep fume and gases away from themselves and other workers.
  • Local exhaust ventilation systems can be used to remove fume and gases from the welder’s breathing zone. Keep fume hoods, fume extractor guns and vacuum nozzles close to the plume source to remove the maximum amount of fume and gases. Portable or flexible exhaust systems can be positioned so that fume and gases are drawn away from the welder. Keep exhaust ports away from other workers.
  • Consider substituting a lower fume-generating or less toxic welding type or consumable.
  • Do not weld in confined spaces without ventilation. Refer to applicable OSHA regulations
  • Respiratory protection may be required if work practices and ventilation do not reduce exposures to safe levels.

Want more on the report? Read here


Westermans International has a choice of new and used Welding Fume Extraction systems with many options that are affordable to you.  We are confident we can supply a system to protect yourself and your colleagues in the welding and fabrication world.

Do not let this be an asbestos situation.  Act now.

 

 

This entry was posted in Westermans News and tagged , , . Bookmark the permalink.

3 Responses to Protect your welder – he needs it

  1. Nice article. Unfortunately most welders aren’t fully aware of the damages welding can cause to health if not being done in the right environmental conditions. Many of my family members has welding workshops and I often see that some of their employees and particularly new ones just don’t pay enough attention to the risks factors of welding.

  2. Hồng Ký says:

    After learning the electric welding in school, the next morning to wake up, I saw my eyes hurt, red and many tears, misty look like fog.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.