Used Magnatech Pipe and Tube Welding products for Sale

Magnatech products provide complete orbital TIG welding applications for sanitary tubing and perfect seals. So if you are looking for a solution for orbital tube and pipe welding applications, used Magnatech welding  solutions could be the obvious choice.

Magnatech's primary focus is the design and manufacture of equipment for orbital welding applications. Orbital means that the pipe is in a fixed position and cannot be rotated – the tool must move around the fixed pipe. Tube and pipe welding, especially in field applications, is possibly the single most demanding requirement of welders’ skills. 

Magnatech LLC are an idustrial provider of solutions involving orbital tube and pipe welding products for low clearance areas.

The company was founded in 1946 to manufacture aerospace components including circular seals for extreme temperature and pressure applications, supporting initial development of the gas turbine engine. In 1964, the company was purchased by the present owners, and moved to its current location in Connecticut, USA.

The advent of nuclear power generation required the design of innovative technology to seal the nuclear pressure vessel. Magnatech developed circular metal seals to withstand the heat and pressure requirements. GTAW welding was required to join the ends of the tubular metal seals to form a complete circle. Magnatech designed an autogenous tube welder in 1969, allowing an employee with no welding skills to make perfect repeatable welds, with a zero defect criteria. 

The success of the tube welder led Magnatech to develop a multipass pipe welding system. These products formed the basis for Magnatech’s new business focus. Thousands of systems have been sold worldwide to date. 

Magnatech Today

Magnatech's primary focus is the design and manufacture of equipment for orbital welding applications. (Orbital means that the pipe is in a fixed position and cannot be rotated – the tool must move around the fixed pipe.) Tube and pipe welding, especially in field applications, is possibly the single most demanding requirement of welders’ skills. As with many skilled craftsmen, there are a declining number of welders worldwide. Mechanised equipment provides a practical solution, both by increasing individual productivity, and by augmenting the abilities of lesser skilled welders. Over 80% of welding costs are labour and overheads. Therefore, the only means for a manufacturer, fabricator, or contractor to meaningfully reduce costs is to automate.

Magnatech’s proprietary line of orbital pipe welding systems is the most compact available in the world today. We are experts in miniaturizing complex mechanisms which must be rugged enough for use by welding personnel in the harsh welding environment. Our compact digital power supplies provide precise control of the welding process, yet are tough enough to withstand field use.

The European Magnatech International office is in The Netherlands and can provide product demonstration, product training and in-depth project knowledge to support customers in Europe, Russia, the CIS countries and the Middle East. 


Magnatech current products includes orbital weld heads for tube and pipe multi-pass welding starting at a diameter of .125 inches

COMPLETE PRODUCT SOLUTIONS FOR ORBITAL TUBE & PIPE WELDING APPLICATIONS

  • EZ ORBITAL SYSTEM 517
  • Weld heads 800 SERIES
  • WEld heads 1000 SERIES
  • REDHEAD weld heads
  • D-HEAD 420
  • QUICKCLAMP 432/433
  • T HEAD 419
  • PIPELINER II 609
  • TUBESHEET Weld Heads
  • TUBEMASTER 514
  • PIPEMASTER 515
  • PIPEMASTER 516
  • Pipemaster MPS 4000

Not sure what you need? Magnatec have a PRODUCT Selector on their web site to help you decide.

Choose a wall thickness - then a diameter for product selection

WALL THICKNESS

  • .020in - .120in | .508mm - 3.048mm 
  • .120in - .500in | 3.048mm - 12.7mm 

PIPE DIAMETER 

  • 0.125in - 6.625in | 3.175mm - 168.275mm 
  • D Head
  • Quick Clamp

PIPE DIAMETER 

  • 6.625in - 14.0in | 168.275mm - 355.6mm
  • D Head 
  • T Head 

PIPE DIAMETER 

  • 14.0in - Unlimited | 355.6mm - Unlimited
  • T Head
  • Pipeliner 

WALL THICKNESS

  • .500in - Unlimited | 12.7mm - Unlimited 

Magnatech LLC provides complete orbital TIG welding applications for sanitary tubing and perfect seals


Orbital Tube Welding

  • The Aerospace Industry 
  • The Food, Dairy & Beverage Industry
  • Pharmaceutical Biotechnology 
  • Semiconductor and Related Industries 
  • Brewery & Winery Industry

Orbital Pipe Welding

  • Fossil Fuel Power Generation Industry
  • Nuclear Power Generation Industry
  • Petrochemical and Chemical Plants 
  • Process Piping
  • Pulp & Papermills
  • Shipbuilding 

Pipeline Welding

  • Offshore
  • Pipeline

Magnatech products provide complete orbital TIG welding applications for sanitary tubing and perfect seals. So if you are looking for a solution for orbital tube and pipe welding applications, used Magnatech welding  solutions could be the obvious choice.

Magnatech's primary focus is the design and manufacture of equipment for orbital welding applications. Orbital means that the pipe is in a fixed position and cannot be rotated – the tool must move around the fixed pipe. Tube and pipe welding, especially in field applications, is possibly the single most demanding requirement of welders’ skills.

Read More

Worldwide Shipping

taken care of with every Westermans order

Find Out More
email

Register Now!

to receive our latest Stock Updates & Exclusive Offers

By submitting your details you consent to their use in accordance with our Privacy Policy

language

Select Language